LG Flatron 1718S-BN has power but no video

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • De3rcr
    started a topic LG Flatron 1718S-BN has power but no video

    LG Flatron 1718S-BN has power but no video

    Hi Everyone,

    This is my first time posting about a problem I have. I've fixed 2 other lcd's by replacing caps and they work fine, but this one I don't know what to do next. I have this monitor that doesn't show any video when I connect it to a computer. I replaced the power supply caps with panasonic FM's but I still get the same results.

    I get 5.14v at the power supply output cable and the backlights seem to came on and stay on, but there is no video, the menu doesn't show when I push the button either.
    Attached Files

Related Topics

Collapse

  • PantherDave
    Microsoft Surface Pro (5th gen) model 1796 - no power
    by PantherDave
    Hi all!

    I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

    I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
    https://www.badcaps.net/forum/troubl...-hardware-devi...
    05-29-2024, 02:01 PM
  • GLISIT
    Asus Probook P5440UF-XB74 power issue
    by GLISIT
    Hi all,

    TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


    I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

    A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
    01-16-2025, 02:29 PM
  • sam_sam_sam
    Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
    by sam_sam_sam
    I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

    One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
    03-31-2024, 02:12 PM
  • Document Archive
    HP Pavilion Power Pavilion Power 15-cb009nl Notebook 15 Specification for Upgrade or Repair
    by Document Archive
    This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
    09-06-2024, 05:59 AM
  • meraklinetx
    Asus Z97-a power cycle, no boot no cpu voltage
    by meraklinetx
    Hello, I have an asus Z97-A motherboard and it doesn't start which was working properly before, the problem isn't related by ram, ram slots or psu (I changed all and nothing work), the exact problem is when you switch it on , it starts and after 1 seconds (no boot or display picture) it's off and then on cycle continuously until you power it off from psu also it's responding to the power switch for turning it off if you keep pressing it 3 or 4 seconds (power button pin has 3.3v) , also when you start it with eatx 12v socket connected this is happening (power cycle also all voltages are resetting...
    05-10-2023, 06:08 AM
  • Loading...
  • No more items.
Working...