Hanns - G 19" Input dies

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sceva
    Senior Member
    • Feb 2010
    • 196

    #1

    Hanns - G 19" Input dies

    Plugged this in, and it worked fine for about 2 hours. Then the screen went to "Input signal out of range". I unplugged it, opened it up and could not see anything out of the ordinary. Turned it back on and it worked for about 1/2 hour, then I got the out of range message again. I tested the caps on the right 1/2 of the board and they are all ok.

    This is kind of a stange board - the PS, main board, and inverter all on one PCB...

    Any ideas?

    Thanks.
    Attached Files
  • Rtech
    Badcaps Legend
    • Jul 2010
    • 1095

    #2
    Re: Hanns - G 19" Input dies

    If you can start PC in 'Safe mode',then try selecting 'enable VGA mode',and let the monitor run,and see if you get the message again ??,Is it possible you need an updated Driver ? or the refresh rate is wrong etc etc.

    Comment

    • sceva
      Senior Member
      • Feb 2010
      • 196

      #3
      Re: Hanns - G 19" Input dies

      Originally posted by Rtech
      If you can start PC in 'Safe mode',then try selecting 'enable VGA mode',and let the monitor run,and see if you get the message again ??,Is it possible you need an updated Driver ? or the refresh rate is wrong etc etc.
      No. Today I turned it on, restarted the computer, and even when the pc was booting it showed the input signal out of range.

      Comment

      Related Topics

      Collapse

      • ugamazing
        820-02020 Super Weird Issue: Keyboard Input Character Map "Wrong"?
        by ugamazing
        So, I have a really bizarre issue that I'm struggling to identify the cause of. Working on an 820-02020 board with some bizarre keyboard/input-source character mapping. My suspicion is a possible damaged SPI ROM (U1970), perhaps, but I'm really not sure in this case:

        1. The issue is pretty weird, but when installing MacOS, I noticed my WiFi password did not work. I quickly realized the special characters (!@#$%^& etc) were not mapping correctly.

        2. I noticed the keyboard layout/input-source is defaulting to JAPANESE every single time I restore the board. I am not...
        04-10-2024, 08:06 AM
      • Dannyx
        Modifying SMPS input voltage range
        by Dannyx
        Good day folks. Long time no see. It's been a while since I've tinkered with any new projects, despite one thinking this would be the perfect time, with the pandemic and the quarantine, people tend to stay indoors....it's not my case anyway: I go to work like normal, but it's here where I'm bored out of my mind with nothing to do, so here's something.

        A while back, I got myself this adjustable load kit form off Ali. I put it together and it works. It's powered by an AC or DC input and I've been running it off a 12v wall adapter on the bench. What good is such a device if it doesn't...
        03-30-2020, 06:45 AM
      • Document Archive
        Texas Instruments bq24745 bq24745RHDR bq24745RHDT Battery Charger IC for Laptop Computers Datasheet
        by Document Archive
        The bq24745 bq24745RHDR bq24745RHDT is a high-efficiency, synchronous battery charger with an integrated input-current comparator, offering low component count for space-constrained, multi-chemistry battery-charging applications. The input-current, charge-current, and charge-voltage DACs allow very high regulation accuracies that can be easily programmed by the system power-management microcontroller using the SMBus interface. The bq24745 charges two, three, or four series Li+ cells, and is available in a 28-pin, 5-mm x 5 mm QFN package.

        The bq24745 features dynamic power management...
        10-23-2024, 02:50 AM
      • Document Archive
        LM358 LM358S-13 Datasheet
        by Document Archive
        The LM358 LM358S-13 consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

        Application areas include transducer amplifiers, dc gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM358 series can be directly...
        10-07-2024, 04:12 AM
      • Document Archive
        AD7276, AD7277, AD7278, AD7274, AD7273​ Datasheet
        by Document Archive
        AD7276, AD7277, AD7278, AD7274, AD7273

        The AD7276, AD7277, AD7278, AD7274, AD7273 are 12-bit/10-bit/8-bit, high speed, low power, successive approximation analog-to-digital converters (ADCs), respectively. The parts operate from a single 2.35V to 3.6V power supply and feature throughput rates of up to 3 MSPS. The parts contain a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 55 MHz.

        The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors...
        10-07-2024, 05:32 AM
      • Loading...
      • No more items.
      Working...