Re: Vizio Sound Bar No Power Pls help
Hi yes I tested the one fuse on it thts F1 and theirs Continuaty with board disconnected by it self no power and disconnected no I haven't check for voltages and so from were should bi check ? the actuall power connection were it receives power or? How I don't have a component tester I'll have to buy one later this week and no I haven't checked other components for short I'm gonna go over with multimeter see wht I find
The brand on caps very difficult to make out as well wht type they are (Samyoung) 120uf on the biggest one on the other I can't tell Brand's
-
Re: Vizio Sound Bar No Power Pls help
So you are not getting ANY Voltage at all on the cold side?
What DC V do you get when measure right between the two legs of the main filter caps in the hot side (be real careful since you will be working in the deadly side of the circuit)?Leave a comment:
-
Re: Vizio Sound Bar No Power Pls help
The easiest way to measure ESR is with an ESR or component tester. It can't be measured with continuity.
With the power off and disconnected have you checked any of the components for shorts, is the fuse ok, if this is open then it can indicate a failure in the hot side.
Have you checked for any voltages ?
What brand are the capacitors, randomly replacing when there is so much to test and check is rather pointless IMO.
The 24v is on the same track, doesn't matter if they are soldered together or not.Leave a comment:
-
Re: Vizio Sound Bar No Power Pls help
Pictures of power board 0500-0515-2240Attached FilesLast edited by Mr.Nientiendo; 09-24-2019, 01:59 AM.Leave a comment:
-
-
Re: Vizio Sound Bar No Power Pls help
Hi and thnk u for replying i Ben trying to upload pictures and it won't allow me to I don't have any special machinery to test I can just test with multimeter the esr right with continuaty option if not wht If just replace all the caps would tht fix my issue Note: I noticed the 2 +24V are soldered together are they supposed to be like tht on backAttached FilesLast edited by Mr.Nientiendo; 09-24-2019, 01:59 AM.Leave a comment:
-
-
Re: Vizio Sound Bar No Power Pls help
Photos and do you have tool to measure the ESR of the caps?Leave a comment:
-
Vizio Sound Bar No Power Pls help
Ok so I bought a non working Vizio sound bar Model
vizio s3851w-d4 iam assuming it's power board issue
Possibly a cap or any help would be much appreciated to repair
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi all,
TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!
I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!
A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about... -
I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...09-06-2024, 05:59 AM
-
Hello, I have an asus Z97-A motherboard and it doesn't start which was working properly before, the problem isn't related by ram, ram slots or psu (I changed all and nothing work), the exact problem is when you switch it on , it starts and after 1 seconds (no boot or display picture) it's off and then on cycle continuously until you power it off from psu also it's responding to the power switch for turning it off if you keep pressing it 3 or 4 seconds (power button pin has 3.3v) , also when you start it with eatx 12v socket connected this is happening (power cycle also all voltages are resetting...
Leave a comment: