Onkyo TX-RZ800 microcontroller, or it's software needed

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tibimakai
    Badcaps Legend
    • Jan 2012
    • 3680
    • USA
    #1

    Onkyo TX-RZ800 microcontroller, or it's software needed

    Anybody can help me out with this?
    This receiver, had a power surge and messed up the Micom, among other things. I have another IC and Todd from another forum, could program it for me, but I need the software from it, or a complete IC.
    Any help, would be appreciated.

    Tibor
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Ken123
      Bird bga 5000 pc software needed
      by Ken123
      Hello.
      i bought this Bird rework station but comes without software for pc. I cant find anywhere to download it and dont know the name of software.

      Could anyone help me pls?

      /Ken...
      1 Photo
      02-17-2024, 08:30 AM
    • hirens
      EZP 2023+ software & Drivers Needed
      by hirens
      hey guyz

      some one kindly help me with EZP 2023 Programmer drivers and software

      thanks
      07-06-2023, 11:39 AM
    • iTec
      Aiper Scuba X1 Pool Cleaner Robot
      by iTec
      Hello everyone, I'm not really sure if this is the right place to actually post about this, but i have Aiper Scuba X1 that I'm trying to read the Microcontroller data from. The chip is National N32G455. After dismantling the unit I found a Debug connector and on the backside of the board 6 point that reads: GND RX VCC SWD TX SWC. I'm familiar with Nuvotons, MECxxx, ITE chips but NOT these kinds of microcontrollers. I need someone who can direct me to what's needed to read it ONLINE as they have coated the entire board. I got the ST-Link yesterday and connected the wires as shown in the picture...
      07-16-2025, 11:02 AM
    • SMDFlea
      Copy DMI info easily with Hex editing software and Macro script
      by SMDFlea
      Copying DMI information from an old bios to a new one is difficult for some members, often they have no experience with a hex editor,or some that have tried find it too hard.There is an option to make things easier for those members so that they don`t need to post their own bios backup for the DMI copying.

      Experienced bios modding members can help by posting in other threads the DMI offsets,macro script generated by the software and a download link to the software at softpedia mentioned in this guide,or post your macros in the comments here with a link to the bios request thread ....
      02-28-2023, 02:14 PM
    • 2elw
      SVOD4 PCB pictures + parts
      by 2elw
      Hey, I find it very absurd that the SVOD4 costs so much and has zero documentation. I had no other choice than to buy it to unlock ECs, if there was any documentation or firmware avalible I could've made it or something simmilar. Anyways here are some of the most important parts:

      STM32H723VGT6 MCU - It's a microcontroller by STMicroelectronics and its the whole brain of the SVOD4. It has flash memory for the firmware which can be updated by the SVOD4 program. Its also powered by the AMS117 which converts 5v into 3.3V. 7€ on AliExpress.

      GW1N-UV9UG169C6/I5 FPGA - Its a...
      07-04-2025, 12:23 PM
    • Loading...
    • No more items.
    Working...