Need program nuvoton CHIP NPCxxx

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • clrscr
    Senior Member
    • Dec 2020
    • 189
    • sing
    #1

    Need program nuvoton CHIP NPCxxx

    Hello everyone!
    i have a new nuvoton chip like NPCX998, NPCX499,.... i know that need to load data to it before use. i researched, and found out that J-link charger can do this, i don't know how to use it, someone who has used it please help me
    thanks!!!
    ************************************************** ***********************************
    Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
    all donations are welcome,
    see the donate button at the bottom of the page, or
    >>>>> click on this link to donate via PayPal. <<<<<
    Every donation made will go towards server fees and maintenance costs.
    ************************************************** ***********************************
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 31314
      • Albion
      #2
      you may not need jlink, read the datasheet.
      a lot of ARM based chips can be programmed with a cheap serial adapter.

      do you have the software to put in it though?

        Comment

        • clrscr
          Senior Member
          • Dec 2020
          • 189
          • sing
          #3
          Originally posted by stj
          you may not need jlink, read the datasheet.
          a lot of ARM based chips can be programmed with a cheap serial adapter.

          do you have the software to put in it though?
          i can get data from an old chip, I think there is a way to program like SPI programming devices RT809H, SVOD4,...
          ************************************************** ***********************************
          Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
          all donations are welcome,
          see the donate button at the bottom of the page, or
          >>>>> click on this link to donate via PayPal. <<<<<
          Every donation made will go towards server fees and maintenance costs.
          ************************************************** ***********************************

            Comment

            • clrscr
              Senior Member
              • Dec 2020
              • 189
              • sing
              #4
              buy new chip, need to load data for it to work
              Attached Files

              if you find these attachements useful please consider making a small donation to the site

              ************************************************** ***********************************
              Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
              all donations are welcome,
              see the donate button at the bottom of the page, or
              >>>>> click on this link to donate via PayPal. <<<<<
              Every donation made will go towards server fees and maintenance costs.
              ************************************************** ***********************************

                Comment

                Previous template Next

                Related Topics

                Collapse
                • BMCappelletti
                  Asus Chromebox CN62 - wrong chip put on BIOS reader
                  by BMCappelletti
                  Long story short:
                  - dad converted Asus Chromebox CN62 into Windows compatible, with mrchromebox BIOS, years and years ago
                  - gave the computer to his son a couple years later
                  - son now decided to revert it to Chrome OS, to sell it as original (re-writing BIOS with the backup one created by his dad)
                  - too lazy to remove the board from the case, thought a voltage regulator was the BIOS chip (you know... it has 8 legs)
                  (seems like the story was not that short)

                  He used alligator clips to read the chip. No luck reading it. Removed chip and placed on a SOC-8...
                  01-08-2025, 07:27 PM
                • acedogblast
                  Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
                  by acedogblast
                  This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

                  There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
                  11-02-2024, 05:13 PM
                • DynaxSC
                  ASRock B650M PRO RS - BIOS CHIP 25Q256JW BLOCKED BY STATUS REGISTERS
                  by DynaxSC
                  Hi

                  I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
                  The SPI chip is an Winbond 25Q256JWEQ model (1V8).
                  The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
                  The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.

                  I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6...
                  08-04-2025, 12:20 PM
                • Azurain
                  Elitebook 840 G5 Bios Chip Soldering Question
                  by Azurain
                  Hi everyone,

                  I have an HP Elitebook 840 G5 that I am trying to get working again. I've removed the front bios chip (the 32mb one) and have run it through HP unlocker already. I've uploaded and verified the new bin, but am now experiencing an issue that has led me to believe I've been soldering the chip back to the motherboard incorrectly.

                  Essentially, after re-soldering the chip back into its place and reassembling the laptop, the charging light immediately flashes orange and white and then shifts to a solid white. The capslock and numlock lights blink seven times...
                  04-14-2023, 06:58 PM
                • Loki_Fido
                  Requesting help identifying chip in Macbook Pro A2485
                  by Loki_Fido
                  Hi ya folks,

                  I have this MacBook Pro A2485 (M1 Pro 2021) which came in for repair.

                  It had a shorted SSD power supply chip. Therefore it was stuck at 5V.
                  I replaced it and the SSD are fine. No more shorts.

                  But The mac still pulls 5V and 200mA. If i leave it alone for 5 mins, the mac manages to receive 20V and 40mA. Of course, which doesnt mean the mac starts after power meter reading 20V.

                  But while the mac is stuck at 5V, i checked the board with thermal and found this chip was trying to start. Chip picture is attached.
                  Chip marking...
                  08-07-2025, 10:17 PM
                • Loading...
                • No more items.
                Working...