PCB USB to SATA

badcaps

Member

Join Date: Jul 2005

Posts: 19
#1

PCB USB to SATA

10-09-2022, 10:40 AM

Hi everyone

I need help with a Western Digital

MDL:WD50NDZW-11A8JS1
S/N: WX52D807LTRZ
PCB 2060-810035-000 REV P0

I need to convert this USB connection to SATA. So looks like I need to solder a SATA connection but I can't find any schematics for this one. Anyone know where to solder the connections to the PCB or the schematics for this?
Attached Files
Tags: None
stj

Great Sage 齊天大聖

Join Date: Dec 2009

Posts: 31011

Country: Albion
#2

10-09-2022, 11:19 AM

Re: PCB USB to SATA

get a datasheet for the asmedia convertor chip
then trace the output pins to the resistors or testpads around the controller with the thermal pad on it
Comment
tahc81

Member

Join Date: Nov 2019

Posts: 42

Country: Slovakia
#3

10-18-2023, 02:17 AM

Re: PCB USB to SATA

Check this - https://forum.acelab.eu.com/viewtopi...=10708&p=39001
Comment

Previous template Next

GIGABYTE X299 AORUS ULTRA GAMING - SATA PORTS 4-7 NOT WORKING ???

by DynaxSC

Hi,

I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
The board is generally working now, all PCIe ports are working, Windows installs normally.

However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
03-10-2025, 12:27 PM
HISENSE 65E7KQ PRO - no boot

by Sus256

Hi all!

HISENSE 65E7KQ PRO
RSAG7.820.13512 - chassis
MT9618BAATAB - cpu
RSAG7.820.12059 - power
HD650Y3U77 - panel
KLM8G1GETF - emmc

The TV does not turn on, the standby indicator is on. All voltages are present.
Emms is dead. Not readable, not detected.
Replaced emmc.
But with another dump there is no launch

Terminal log

UART
<
AC_ON
RPMB key is not yet programmed

HASH1_VERSION=0x00000000 64bit
E-B
FDE enabled
layout pattern onebin by SAR7,0...
- Channel: Troubleshooting TVs and Video Sources
06-01-2025, 02:11 AM
HP Z2 G4 + 3TB SATA 6Gb/s 7200 HDD i7-8700K Specification for Upgrade or Repair

by Document Archive

This specification for the HP Z2 G4 + 3TB SATA 6Gb/s 7200 HDD can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Z2 G4 + 3TB SATA 6Gb/s 7200 HDD boardview and Z2 G4 + 3TB SATA 6Gb/s 7200 HDD schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
- Channel: Server, iMac, & Desktop PC Specifications
09-12-2024, 03:28 PM
HP ENVY x360 ENVY x360 Convert 15-ds0502saBundle 6TD07EA Hybrid (2-in-1) Specification for Upgrade or Repair

by Document Archive

This specification for the HP ENVY x360 ENVY x360 Convert 15-ds0502saBundle 6TD07EA Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the ENVY x360 Convert 15-ds0502saBundle 6TD07EA boardview and ENVY x360 Convert 15-ds0502saBundle 6TD07EA schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant...
- Channel: Laptop, Tablet, & Notebook Specifications
09-06-2024, 11:17 AM
Best way to solder LVDS connector for beginner (and qfn) ?

by corrize

Hello, I'm a beginner for micro soldering. Right now I have some difficult to solder a qfn 20, I guess I put too much solder on the thermal-ground pad, the result is a corner of chip wich don't touch the board (last try).

I use a wire solder with hot air, I tin the board and chip before with iron and I use good flux.

I will have to solder a LVDS connector (40 pins, laptop pc), I saw a solder paste in seringe, good quality (it does not scatter).
See the test :
https://youtu.be/bNAzC-EvqHs?t=1767

With hot air from bellow the board, that's...
- Channel: Equipment Usage, Soldering, Techniques, and Reviews
03-09-2023, 02:57 AM
Loading...
No more items.

PCB USB to SATA

PCB USB to SATA

Comment

Comment

Related Topics