Component identification marking NTX

zmogienas

Member

Join Date: Jan 2014

Posts: 25

Country: Lithuania
#1

Component identification marking NTX

05-19-2022, 03:21 AM

Hello,

help me identify burnt component. It looks like ceramic capacitor, marking NTX (photo attached). Have no other side. Can't find anything on Google. Any ideas?
Attached Files
Tags: None
stj

Great Sage 齊天大聖

Join Date: Dec 2009

Posts: 30979

Country: Albion
#2

05-19-2022, 06:11 AM

Re: Component identification marking NTX

your missing some numbers,
show where it came from.
it could actually be a MOV (metal oxide varister)
Comment

Previous template Next

Bose Acoustimass 10 IV Subwoofer No Sound. Help with burnt component identification?

by nobbnobb1

I picked up this used Bose Acoustimass 10 IV speaker system. Speakers seem to work fine, but the subwoofer does not make any noise. So I took apart the unit and found some obviously failed (burnt) components:

- 1x 3.14 A @ 250V main circuit fuse
- 1x bridge rectifier GBU601. there's actually two of these on the board, one is obviously burnt and the other does not seem to have any anomalies like shorts. However I figure may as well replace both.
- 2x diode. This is tricky because the only markings I see on it are: "617 402". No current rating or anything else....
- Channel: Troubleshooting Audio Equipment
11-16-2024, 09:56 PM
Vizio D55un-E1 burnt ceramic capacitor identification

by ITF

Hey, I'm extremely new to TV repair. Long story short, TV popped when I turned it on, opened it up, located the burnt ceramic capacitor, but the label with the info on it was burnt out. I don't know much about this stuff, so I was wondering if anyone could give me some info on the capacitor I would need so I could solder in the new one. The nearby capacitors have the labels on them, but they vary. The power supply board part # is: PLTVHU401XABV The board location number of the capacitor is C9100 and it is almost dead center on the board....
- Channel: Troubleshooting TVs and Video Sources
04-01-2020, 02:44 PM
Hp Probook 650 G2 identification of the burnt component

by mohammedsaid

Hp Probook 650 G2 identification of the burnt component

Q60010 not found
D6035
Motherboard CIRCUS 6050A2723701-MB-A02...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
09-04-2023, 08:21 AM
2012 Mac SSD (SanDisc Wide One) burnt chip identification

by abajor

I have an SSD from a 2012 to early 2013 Macbook pro, the SanDisk model SD5SL2-512G-120SE

Attached is a photo of the burnt chip. I'm assuming it's some sort of voltage regulation chip. The numbers are obscured by the damage.
I am attempting to recover data from this SSD, obviously this chip needs to be replaced before anything can be done.

Is there anything else I should check to verify the health of the NAND?
Thanks if anybody knows what part I'm looking for....
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
07-10-2024, 05:06 PM
IC Identification with the marking "ON"

by Mufasa

Hello Everyone,
I can't find out who makes fets with the marking "ON" can some help.
Also, I thought I saw some posts that had this information along with other manufacturers but I can't find it.
- Channel: General Computer & Tech Discussion
05-28-2024, 03:31 PM
Loading...
No more items.

Component identification marking NTX

Component identification marking NTX

Comment

Related Topics