The reason I ask is I can buy a 111 volt battery pack
Or an inverter that operates at 110 volt ideally pure
sign wave
Or an inverter that operates at 110 volt ideally pure
sign wave
-
-
Re: I want to know if this idea is feasible switch mode battery operated 110 volt pow
it can obviously be done, 12v of lithiums and an invertor - BUT
your talking about a 10:1 boost in voltage so even if your efficiency is 100% your also looking at 10:1 current.
so a 1A load would pull 10A from the batteries. -
Re: I want to know if this idea is feasible switch mode battery operated 110 volt pow
What I am asking is if you start with a 110 volt battery pack so you are not up-ing the voltage the voltage is already there you just are using current from the battery battery packComment
-
Re: I want to know if this idea is feasible switch mode battery operated 110 volt pow
well you can connect directly to anything that uses a rectifier to create dc - like a switching psu.
if you need ac there are sine modules on ali, but i think you need higher input - probably 140 or moreComment
-
Re: I want to know if this idea is feasible switch mode battery operated 110 volt pow
no sorry,
i know a friend had some from ali-express - they are used in comercial invertors.
to get 240vac out you have to put something like 300v in.
you select the frequency with a jumperComment
-
This specification for the Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Switch V 10 SW5-017P boardview and Switch V 10 SW5-017P schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-06-2024, 05:30 AM
-
Great to be here! I'm a newbie here trying to find a "micro", momentary push switch to repair a Sony "clamshell" video walkman. This micro switch has long since discontinued by Sony, however I hope there are third-party switches of the same size and functionality that I might be able to source to play the same role. The purpose of this switch is to tell the video walkman that the user has activated the mechanical tape eject button, turning that physical action into an electronic signal that tells the tape transport mechanism to open so one can load or eject a video tape. I... -
Hello,
I've been working on a NEC TurboExpress and I accidentally got the plastic inside the power ON/OFF switch too hot while doing other repairs and melted it. At first, it would still power on when sliding the switch, but you had to really press inward while sliding to get it to work.
I removed the switch component and tried to gently melt the plastic back so it would work more reliably and all I managed to do was make it worse.
I need to find a replacement On/OFF switch for this, but having some trouble figuring out which kind of switch I need.... -
Sense these battery packs are hard to find Also for the incandescent light bulb version as well
Sense I found a 6 volt BMS board I decided to make a couple of them with a charging port on the side of lantern to charge the battery pack11-24-2024, 06:05 PM -
Panel Mount 4 Position 8 terminals Universal Rotary Cam Changeover Switch LW26-20 20A
( needs more cam circuits for the machine to work correctly again )
https://www.ebay.com/itm/275321870186
To
3 Position 16 Terminals Universal Rotary Cam Changeover Switch LW28-20 20A
( not 4 positions but the right amount of cams circuits )
https://www.ebay.com/itm/274660439950
I going to take the 4 position cams selector switch and remove the cams that are on it and remove the cams off of the 3 position selector switch and swap them around...
Comment