Board number three

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • EasyGoing1
    Shock Therapist
    • Sep 2016
    • 977
    • USA

    #1

    Board number three

    The third and final board I got the other day ... is a project that I tried to home etch a couple of times but for some reason, it never worked right. So I finally ordered the fabricated version and it works perfectly.

    If you've ever tried to program an ESP-01 Arduino Wifi board, then you know what a pain in the ass it is because you have to manually reset for each upload then reset again to gain access to it ... well with this setup, you can program it just like any other Arduino. The small-cap gets hit with the DTR pin and it puts the ESP-01 into the right mode to accept the program then when the program is uploaded, it resets the board and you can communicate with it via the serial to USB adapter.

    This instructable inspired this project ... the details of how it works are there if you're interested.

    Pics ...



    sigpic

Related Topics

Collapse

  • Tynan Dill
    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
    by Tynan Dill
    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

    Upon bringing it home and plugging it up, it showed a standby light.

    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

    The screen seems to blackout and stay black, but with a flashlight I can see the display.

    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

    Assuming...
    11-22-2024, 01:46 PM
  • m1ch43lzm
    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
    by m1ch43lzm
    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
    05-12-2025, 08:37 PM
  • Hakuu
    LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
    by Hakuu
    Hi There,

    This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

    After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

    More Details

    TV Model - LG OLED77G1PUA

    Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
    07-12-2023, 02:37 PM
  • jb_Bak
    Sony xbr-65x900c main board issues?
    by jb_Bak
    Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

    Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
    Power Board Connector that goes to Main board
    CN6401
    Pin 01 NC
    Pin 02 NC
    Pin 03 "BL_ON": 0V
    Pin 04 "N/C"
    Pin 05 "STBY 3.3V": 3.5V
    Pin 06 "GND": N/C
    Pin 07 "AC_OFF"...
    09-27-2021, 04:52 PM
  • canadaboy25
    Panasonic TC-P54VT25 No image. A or D board?
    by canadaboy25
    I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

    The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

    I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
    01-17-2021, 01:06 AM
  • Loading...
  • No more items.
Working...