DeWalt's Grinder

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
Previous template Next

Related Topics

Collapse
  • imtmiissa
    Ask about IO KB9012QF
    by imtmiissa
    Hi, I want to change KB9012QF A4 on bored model LA9981P for KB9012QF A3 on bored model LA-9104P can i do it without programming because it in old bored and already programmed
    02-17-2023, 08:50 AM
  • TheBugger70
    Backlight 50HYT62U
    by TheBugger70
    hi trying fix cousins tv with no backlight tv is hitachi 50hyt62u i beleve the power suply is vistel 17ips20. i checked power coming out the boared to leds and was getting meter jumping from around 2v to 9v so i disconected leds from bored and was still getting the same. i tryed testing the leds wen unpluged from bored but wasnt able to get any reading. im wondering if the power detects that the led's have failed it wont put the rite power out or if it is a fault with power bored is it posable to test the leds with multimeter the way i tryed by disconecting from power supply and testing from the...
    05-30-2022, 10:21 AM
  • NanoTesting
    Chinese hot air and soldering stations
    by NanoTesting
    What is the consensus? are they useful or trash even in a short term scenario?
    Going to buy a hot air station and Yihua and Baku ones look popular in the "budget" range.
    I will eventually upgrade to an Atten or Quick.
    For example: and
    Are some of the models im going to buy, the Yihua one has some reviews that make it sound decent in EEVBlog and other sites also repair guides so i guess i will opt for that.
    But they all use the same heat gun that looks like it will melt eventually, and that has often reviews of having "dust" inside them on...
    09-27-2023, 06:05 PM
  • Jhhhh
    Can anyone give me any clue of lapto hp x360 g830
    by Jhhhh
    I searched all websites but nothing.
    this is bored id 6050A3316601-MB-A01
    07-30-2025, 07:10 AM
  • harp
    help with graphics driver for eMachine G725
    by harp
    I am trying to find graphics driver for old laptop eMachine G725, for winxp 32bit... from data on internet, https://gadgetaz.com/Laptop/eMachines_G725--1942 it will have Intel GMA 4500MHD graphics, so I downloaded a few of them but nothing work, error say: this computer does not meet the minimum requirements for installing the software. So, please somebody help me to find bare minimum graphics driver to see non deformed screen anymore...
    07-02-2025, 01:26 AM
  • Loading...
  • No more items.
Working...