what was the designer of these caps smoking?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kc8adu
    Super Moderator
    • Nov 2003
    • 8832
    • U.S.A!

    #1

    what was the designer of these caps smoking?

    these are electrolytics in one of my many regency tr-1 radios.
    if wax wont keep moisture out of a paper cap it sure wont keep it in a lytic!
    most early miniature lytics are bakelite tubes sealed with epoxy.
    i remember these nashville lytics being 100% bad in the early 70's when i started fixing stuff.
    Attached Files
  • Super Nade
    Badcaps Veteran
    • Jun 2006
    • 294

    #2
    Re: what was the designer of these caps smoking?

    Do I see OST in your pile of junkers?
    Q6700 @ 3.6 GHz
    Zippy GSM-6600P
    Curcial Ballistix PC6400 (4 x 1Gb) Micron D9GMH
    Abit IP35Pro
    ATi HD4870

    Comment

    • kc8adu
      Super Moderator
      • Nov 2003
      • 8832
      • U.S.A!

      #3
      Re: what was the designer of these caps smoking?

      that out of focus pile is all new parts.
      mostly mbz,mcz,kzg,and a few asst polymers.
      just did up a big bunch of mobo's
      remember a clean bench is one not being used.

      Comment

      • Krankshaft
        Badcaps Legend
        • Jan 2007
        • 2328
        • USA

        #4
        Re: what was the designer of these caps smoking?

        Originally posted by kc8adu
        remember a clean bench is one not being used.
        I gotta remember that one so thats why I can never keep my work bench clean .
        Elements of the past and the future combining to make something not quite as good as either.

        Comment

        • hardwareguy
          Badcaps Veteran
          • Jun 2006
          • 405
          • USA

          #5
          Re: what was the designer of these caps smoking?

          Originally posted by Krankshaft
          I gotta remember that one so thats why I can never keep my work bench clean .

          I hear you there!

          Hmmm.... some odd looking transistors, what was the designation for those metal cans. The only metal cans I'm familiar with are round.


          And yeah.... I'd also assume that those lytics were bad.

          Comment

          Related Topics

          Collapse

          • momaka
            Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
            by momaka
            I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

            For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

            https://www.badcaps.net/filedata/fetch?id=3591771


            https://www.badcaps.net/filedata/fetch?id=3591772

            It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

            https://www.badcaps.net/filedata/fetch?id=359177...
            03-12-2025, 03:42 PM
          • eryjus
            Heathkit IO-4205 Power Supply Caps
            by eryjus
            Hello,

            First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

            I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

            I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
            ...
            05-10-2023, 11:21 AM
          • Paxman_Swede
            Identifying caps on an old Zoom 9000
            by Paxman_Swede
            Hello!

            I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

            The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

            I have studied the board and...
            01-14-2025, 09:51 AM
          • captain150
            Help with switching power supply caps
            by captain150
            I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
            I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
            03-16-2025, 07:34 PM
          • Foetuss
            Gigabyte GA-6OXT :: caps question
            by Foetuss
            Good evening

            I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
            Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

            But I was also suprised about the bigger boys, which are 330µF 25V.
            Could it be they used 25V caps because they were cheaper / available at that time?...
            02-11-2025, 12:22 PM
          • Loading...
          • No more items.
          Working...