Re: Panasonic now selling VESTEL rubbish as their own
Yeah, that's it. Yuck. They used to use LG panels. Now it's just cheapest from China. What can you do though, they all do it.
Panasonic now selling VESTEL rubbish as their own
Collapse
X
-
-
Re: Panasonic now selling VESTEL rubbish as their own
Tom i suppose polaroid sets are vestle based too? just saw these in local asda store.Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
Indeed!!!Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
Good! Looks like Panny is still trustworthy for A400 onwards. Thanks for the info.
Who makes the panel in this set?Last edited by tom66; 04-04-2015, 07:04 AM.Leave a comment:
-
-
Re: Panasonic now selling VESTEL rubbish as their own
Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
Typically, Panasonic only uses their own electrolytic capacitors in their products (except for audio grade units) - not anymore!Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
Cheers tom.Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
I forgot... Sony ain't too bad, i'm just not big on the Samsung panels in their sets, but if it's a choice of Samsung panel vs Vestel chassis... samsung wins every time...Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
Thanks tom for the advice as always i will pass the info on to him.Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
I know what your saying with the blaupunkt tvs they said made in germany on them he thought they was a good buy, but i said we will continue looking he hasnt much cash to spare as just started a new job so i didnt want him wasting it on a bad make so i will look for a lg as he wants something 1080 and about 40inch screen.
You can get a Panny, just avoid anything ending in "A300" as that's Vestel. A400 etc isn't, and will be OK.
Nobody makes TVs in germany except Harmon/Kardon (but they left the business.) Blaupunkt is a German brand, but they sold their name, like so many others...Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
I know what your saying with the blaupunkt tvs they said made in germany on them he thought they was a good buy, but i said we will continue looking he hasnt much cash to spare as just started a new job so i didnt want him wasting it on a bad make so i will look for a lg as he wants something 1080 and about 40inch screen.Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
Yea, anything sub about 40" now is Vestel/UMC. Only exception being LG & Samsung. And we all know about Panasonics now... and I'm not a big fan of Samsung... So yeah... It's a real crap shoot... you can't buy any decent TV these days.Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
ok will do the brother in law was looking at them they also had toshiba and sharp but my guess there vestel too?Leave a comment:
-
-
Re: Panasonic now selling VESTEL rubbish as their own
Guys whats your thought on blaupunkt tvs? just saw local tesco selling 40in versions.Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
That sounds too good to be true, but I'll have to have a look. Need more space though - probably next year...Leave a comment:
-
Re: Panasonic now selling VESTEL rubbish as their own
I think that he keeps the tvs untill the pallet has been fully collected then they are either swaped or refunded for the tvs.Leave a comment:
-
Leave a comment:
Related Topics
Collapse
-
by luis71Hello,i have panasonic TX-43HX580E,I tried to enable 48 bit color,HDR10+ and ALLM and stuck at boot loop screen.I have modified edid.edid.
I have backed up PQ,SPI,and Profile if anyone want
Which usb_auto_update_??.txt can i use to dump firmware?
I would be grateful if anyone could help me to find the firmware for USB recovery.
... -
Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.
TV Model: Panasonic TC-P55ST50
...1 Photo11-20-2024, 08:52 PM -
by l3emarshi have a panasnic vestel tv and need to turn on alexa option using vestel software programming, using usb stck to reprogram software via tv usb port onced changed
Please help me as i cant remember how to do it.
all help is greatly appreciated01-02-2022, 10:50 AM -
by Russ17Hi All,
I was gifted a 50" Panasonic (Vestel Version) LCD, which the previous owner had disassembled and gave to me completely in parts, which had some failed backlight LED's.
I replaced the LED's and got it working, but found some issues with the picture which I have never experienced before.
Having looked on YouTube and various forums, it seems that one of the COF gate drivers has failed.
None appear overheated or physically damaged, but if the gate drivers on the left side of the panel are touched with a bare hand while the set is on, the picture... -
by France_53Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing...
- Loading...
- No more items.
Leave a comment: