Help identifying a component please

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Techie_hobby1
    Senior Member
    • Feb 2023
    • 60
    • England
    #1

    Help identifying a component please

    Struggling to identify this component.
    I thought it might be an Linear Regulator but the pins in the circuit don’t seem to correspond
    Many thanks
    1 Photo
    Tags: None
    • adamok7
      Member
      • Feb 2023
      • 20
      • Kazakhstan
      #2
      Techie_hobby1,
      Check this one - SIT8252B
      https://sg.world.taobao.com/item/802346735371.htm​

        Comment

        • Techie_hobby1
          Senior Member
          • Feb 2023
          • 60
          • England
          #3
          adamok7 perfect thank you.. and from that I have been able to locate the correct datasheet 8252

            Comment

            • truclacicr
              Badcaps Veteran
              • Apr 2019
              • 315
              • australia
              #4
              https://www.boyoic.com/uploads/soft/...21030Q52U1.pdf

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Adam Biderman
                  Nintendo switch HAC-CPU-20 help identifying resistors
                  by Adam Biderman
                  Good morning, I would appreciate help identifying resistors responsible probably for volume down / volume up buttons that I accidently knocked off while replacing fan connector. I enclose picture with location. Thank you for help in advance.
                  1 Photo
                  07-19-2025, 01:49 AM
                • omaar
                  Help Identifying an IC
                  by omaar
                  I need help identifying this IC and, if possible, the value of the capacitors next to it. It is part of the HDMI circuit of an EVGA RTX 2060 GPU. It suffered a short circuit, leaving the graphics card without video and the TV without image....
                  2 Photos
                  06-06-2025, 07:48 PM
                • Digital Solutions
                  Help Identifying IC on MacBooks Pro - 820-02020
                  by Digital Solutions
                  Subject: Help Identifying IC on 820-02020 (MacBook Pro A2338 M1, 2020) — C02045500 / EKQ8LL1A


                  Hi all,


                  I'm working on a MacBook Pro A2338 M1 (2020) with logic board 820-02020.

                  The machine has a power issue — not powering on, and I'm trying to trace the fault.


                  While inspecting the board, I found a cluster of components


                  This area looks damaged or burned — there are about 4–5 components that seem affected
                  ​

                  I've attached a close-up photo of the chip and its surrounding area (see...
                  06-05-2025, 03:43 AM
                • caspian
                  What Zener Diodes on a Linear Power Supply
                  by caspian
                  Dear members,

                  I have a linear variable power supply with unknown brand name that I used for voltage injection.
                  Then it failed. I discovered that its transistors (Q1 and Q2) are shorted.
                  In addition, I discovered that its zener diodes are defective.
                  I can replace the burned transistors.
                  But I do not know the model of the zener diodes. the model number is not marked on the zener diodes.
                  Therefore, I cannot replace the zener diodes.
                  I do not want to test the zener diodes in a test circuit to discover their model or value.
                  no schematics are available...
                  05-26-2025, 12:38 PM
                • m1ch43lzm
                  70mai Dash Cam A510 - help identifying connector on camera module
                  by m1ch43lzm
                  Hi everyone
                  I have a 70mai Dash Cam A510 which failed after about 3 months of being installed in my car, likely due to heat, i got it from aliexpress so no point in trying to return it for warranty (and shipping it back would cost me almost the same as a new one from ali)
                  The camera would boot loop showing 70mai logo on the screen, sometimes it would boot fine then the live view would freeze or display purple lines

                  I already took it apart, and found out that the camera boots fine if i unplug the camera module from the main PCB, sometimes "playing" with the connector...
                  05-11-2025, 06:02 PM
                • Loading...
                • No more items.
                Working...