How Can I Get The Sports Bar Multi TV Thing To Work?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mn_camper
    New Member
    • Apr 2013
    • 4
    • US

    #1

    How Can I Get The Sports Bar Multi TV Thing To Work?

    I have 3 flat screens that I installed caps in & thought it would be fun to male my man cave have the look if a sports bar having different games etc on each one of the tvs.... Preferably in HD

    I have dish network with a duel receiver DVD. There s only HD from 1 of the outputs from this receiver.

    Any ideas what I would need to do or add... & not too expensive?

    Thanks in advance! This is a great forum.
  • slackwarerobert
    Member
    • Apr 2013
    • 13
    • Third World Dictatorship

    #2
    Re: How Can I Get The Sports Bar Multi TV Thing To Work?

    That only lets you record a second channel while watching another one.
    you will need to pay to add a second receiver, and an antenna for the local game for cheapest. Or record one game to dvd, and then play it, the antenna, and the satellite for all 3. You found the drawback over cable.

    DTV has some sort of all games on one screen. So you could split the signal and watch a different postage stamp on each screen. They would all be displaying every game, but you could watch different boxes on each.

    Comment

    Related Topics

    Collapse

    • Dannyx
      "Kinetic" 433Mhz transmitter/receiver discussion
      by Dannyx
      Good day folks.

      TL;DR: has anyone tried pairing one of THESE "kinetic" battery-less switches with THESE generic remote modules ?

      Details: I recently got hit by this craze of wanting to add remote controls to the lights around my house, so I went with those generic 433Mhz remote relay modules found everywhere, which are really basic, easy to use and work well, since I used them before in other projects. What I like most about them is they accept all kinds of 433Mhz remotes that float around Aliexpress, since they're all the same under the hood, save for the...
      03-08-2022, 11:01 AM
    • CDNBrewer
      Running out of Ideas, hoping someone smart can provide some for my ONKYO TX-SR353 Receiver
      by CDNBrewer
      Hello Everyone,

      I have an Onkyo TX-SR353 Audio/Video Receiver (5.1 ch with HDMI) that I am having a really hard time diagnosing and I'm about to throw this in the junk and go buy a new unit that is on sale until the 7th.

      Symptoms:
      • Intermittent (part of the reason why i'm having a hard time isolating problem), sometimes will work for 10+h at a time without issue
      • Original symptom was wife reported loud banging noise (like someone was banging on the wall with their fists) from the LEFT SURROUND speaker and then the unit shut off.
      • I swapped the Left and Right surround
      ...
      08-05-2025, 09:29 PM
    • hollox123
      ASUS ROG Strix G713QR - Keyboard, backlight and side LEDs don't work
      by hollox123
      Hello, I have an "ASUS ROG Strix G713QR" laptop, and for approx. 3 months I have the following problems:

      1. Laptop keyboard doesn't work
      2. The backlight on the laptop keyboard doesn't work
      3. The x2 side LEDs (red) on the laptop don't work

      The power button works, the touchpad works, and all the USB, HDMI, Ethernet, etc. ports work.

      I already tried to reinstall all the drivers and reinstall Windows. So I don't know what to try anymore that is software-related.

      But I am strongly aiming that it is somehow a BIOS-related problem,...
      05-11-2025, 08:05 AM
    • Kezi Gamer
      Marshall stanmore multi room
      by Kezi Gamer
      Hi, recently i have encountered problem with my Marshall stanmore multi room speaker, speaker itself works fine using app from my phone but knobs on actual speaker doesn't work. First thing that came up to me is that maybe something is shorted on the top board and after disassembling the speaker and checking with multimeter I could not find anything wrong, also on the panel multi, and next song button are working and nothing else. Any help is very appreciated​...
      03-24-2025, 08:37 AM
    • FrancescoV
      Onkyo HT-R390 no sound output, video output ok
      by FrancescoV
      Good morning everyone,
      I'm trying to repair an onkyo ht-r390 that has no sound output, despite the volume being at maximum, the rest seems to work; the video output signal (coming from an hdmi input) is present, but the audio is absent. Similar situation if I send an audio signal from any input I have no output.

      The firmware reported is the following:
      M:1.00/11107BLP
      D:?.??/????????
      O:1.00/11107AL

      The DSP firmware given the question marks seems corrupt.

      On the BCHDM-0678 - 25140678 - QPWBCHDM0678A0 board the chip that usually seems...
      05-11-2025, 02:59 AM
    • Loading...
    • No more items.
    Working...