Power fan with plug-in transformer

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • yyonline
    Badcaps Veteran
    • Jul 2009
    • 692
    • USA

    #1

    Power fan with plug-in transformer

    Hello all,

    I'm hoping that someone with a better understanding on electronic theory can double check this for me.

    I want to power a 12V computer fan with a plug-in power supply. I'm not sure which fan I am using for the job yet, but I have two contenders. They are low rpm fans, so they're fairly low power.

    12VDC 0.05A
    12VDC 0.15A

    The power supply I was thinking of using is the 200mA version of this:
    https://cdn.badcaps-static.com/pdfs/...f665b0c3c6.pdf

    Do you think this will work? I'm not sure what excitation voltage is, or if that comes into play with fans.

    Also, The 0.05A fan will only be using 1/4 of the 200mA rating, so the voltage may be too high due to the low load. I think I can use a resistor to step the voltage down, but I'm not sure what spec resistor I should be looking at.

    Any feedback would be greatly appreciated!
  • Th3_uN1Qu3
    Believe in
    • Jul 2010
    • 6031
    • Romania

    #2
    Re: Power fan with plug-in transformer

    You need a DC power supply. An AC adapter (basically just a transformer) is also going to need a diode bridge and a capacitor.

    As for the voltage, don't worry. If anything it will simply run faster. They easily take up to 25 volts.
    Originally posted by PeteS in CA
    Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
    A working TV? How boring!

    Comment

    • yyonline
      Badcaps Veteran
      • Jul 2009
      • 692
      • USA

      #3
      Re: Power fan with plug-in transformer

      Thanks for your input. I'm venturing into unfamiliar territory here, so bare with me...

      I was under the impression that the AC/DC adapter would have a rectifier built in to it. If that's not the case, would running the fan straight off the unconditioned DC output of the adapter cause any issues?

      I'm aware that running at a higher voltage won't damage the fan, but the goal here is quiet. I've done a few tests with a 500mA apapter I have. I have a 1000rpm and 1200 rpm fan that both run at about 1350rpm due to the voltage being around 14-15V. I'm assuming this is because the fan isn't loading the adapter enough.

      Comment

      • Th3_uN1Qu3
        Believe in
        • Jul 2010
        • 6031
        • Romania

        #4
        Re: Power fan with plug-in transformer

        Ah, i read it wrong. It says "AC adapter" but at the bottom it says DC output. That's good.

        If the goal is to have the fan quiet then get a 9 volt or 6 volt adapter.
        Originally posted by PeteS in CA
        Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
        A working TV? How boring!

        Comment

        • Evil Lurker
          Warranty Voider
          • Feb 2011
          • 454

          #5
          Re: Power fan with plug-in transformer

          Go to your local goodwill store. They usually have for sale some used small switch mode ac adapters (for cell phones, printers, etc) that ppl have donated for $2-3 each. Those are regulated usually via a TL431 or some variant across an optocoupler... so both your amperage and voltage should be in spec no matter what size fan(s) you decide to use.

          Crack em open, solder on the proper connection, mount them wherever you want. Its actually cheaper doing that than buying mains AC rated fans. Heck last one I snagged was a 36/16v brick for some HP printer or some crap. I plan on hooking it to an LM317K for a constant voltage adapter.

          Of course if you are really brave you can pop off the two SMD resistors going into the '431 and hook up a couple potentiometers and have a mini regulated adjustable power supply! In that case you want as high a voltage as you can get because its easier going down than up... if you go up you have to replace the corresponding filtering 'lytics to the appropriate voltage range.

          Comment

          • Th3_uN1Qu3
            Believe in
            • Jul 2010
            • 6031
            • Romania

            #6
            Re: Power fan with plug-in transformer

            You only have to replace the bottom resistor on the 431 - the one connected between the 431 and ground. Most times going up in voltage isn't an option anyway unless you live in a 230v area and the charger is meant for universal input.
            Originally posted by PeteS in CA
            Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
            A working TV? How boring!

            Comment

            Related Topics

            Collapse

            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              11-22-2024, 01:46 PM
            • PantherDave
              Microsoft Surface Pro (5th gen) model 1796 - no power
              by PantherDave
              Hi all!

              I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

              I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
              https://www.badcaps.net/forum/troubl...-hardware-devi...
              05-29-2024, 02:01 PM
            • GLISIT
              Asus Probook P5440UF-XB74 power issue
              by GLISIT
              Hi all,

              TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


              I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

              A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
              01-16-2025, 02:29 PM
            • Document Archive
              HP Pavilion Power Pavilion Power 15-cb009nl Notebook 15 Specification for Upgrade or Repair
              by Document Archive
              This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
              09-06-2024, 05:59 AM
            • meraklinetx
              Asus Z97-a power cycle, no boot no cpu voltage
              by meraklinetx
              Hello, I have an asus Z97-A motherboard and it doesn't start which was working properly before, the problem isn't related by ram, ram slots or psu (I changed all and nothing work), the exact problem is when you switch it on , it starts and after 1 seconds (no boot or display picture) it's off and then on cycle continuously until you power it off from psu also it's responding to the power switch for turning it off if you keep pressing it 3 or 4 seconds (power button pin has 3.3v) , also when you start it with eatx 12v socket connected this is happening (power cycle also all voltages are resetting...
              05-10-2023, 06:08 AM
            • Loading...
            • No more items.
            Working...