Need software for Intelligent universal programmer lk48

[stj]

Re: xp48 programmer

only a mod can do that.
it does explain that arguement we had over wether they had removed the parallel port version or not.
i was unpacking it with win7 64bit and you obviously had the last decent o.s. m$ ever made

[megaraider]

Re: xp48 programmer

just read some interesting shit at the makers site,
with the latest software releases you MUST use win-XP and it MUST be 32bit or the installer wont install the parrallel port software.
if your on Vista or newer and/or running 64bit it will ONLY install the UXP usb-port software version!
i suspect it's because they use a 3rd party parrallel port driver from jungo.

Thanks, good to know.
imo it would be more helpful if you move your post to the 'original' thread.

.

[stj]

xp48 programmer

just read some interesting shit at the makers site,

with the latest software releases you MUST use win-XP and it MUST be 32bit or the installer wont install the parrallel port software.

if your on Vista or newer and/or running 64bit it will ONLY install the UXP usb-port software version!

i suspect it's because they use a 3rd party parrallel port driver from jungo.

[mgaloi1970]

Re: Need software for Intelligent universal programmer lk48

Thanks

Hi,
did you manage to find a valid license file or a patch to use the software Labtool uxp or dataman?
thanks

[megaraider]

Re: Need software for Intelligent universal programmer lk48

o.k. i have other problems then, fucking windows is screwing around.

Just a hint: try installing previous versions and watch the behavior. If problem persist then it's, most likely, win screwing around.

[stj]

Re: Need software for Intelligent universal programmer lk48

o.k. i have other problems then, fucking windows is screwing around.
i'll take notes and open a thread for it

[megaraider]

Re: Need software for Intelligent universal programmer lk48

i did, i'm getting a 12gig file that only installs 1 folder with a usb icon.

LT**UXP_1300_WIN7.exe (CRC-32: 567212F4)

Installed folders ...\Labt00l-**UXP, and ...\Labt00l-**XP:
See screen capture files attached.

[stj]

Re: Need software for Intelligent universal programmer lk48

i did, i'm getting a 12gig file that only installs 1 folder with a usb icon.

[megaraider]

Re: Need software for Intelligent universal programmer lk48

from ADV??

Yes, follow the 1st link on your own post.

[stj]

Re: Need software for Intelligent universal programmer lk48

from ADV??

[megaraider]

Re: Need software for Intelligent universal programmer lk48

did you just do that or just print it? [...]

Did it all myself yesterday, top to bottom! [Copy / paste is not my style ]
ALL fully tested under W7

[stj]

Re: Need software for Intelligent universal programmer lk48

Here we go again:

1. Download:
'LT**UXP_1300_WIN7.exe' (~12.5MB)
or
'LT**UXP_1300_WIN10.exe' (~12.6MB)

2. Install.

3. Check installed folders ...\Labt00l-**UXP, and ...\Labt00l-**XP
Either win7 or win10 installation file will create both folders.

4. Patch the exe file:
For 'WLT**XP.exe @0x0003DF80 from 0x55 to 0xC3
For 'WLT**UXP.exe @0x0043DEF0 from 0x55 to 0xC3

And again, please do us all an obvious favor:
- Don´t post obvious strings: Advant3ch 3quipment, labt00l, ...
We really do not need the devil's search engine to find us...
- stop attaching large files widely available on internet to posts.
- use g00gle
- DIY - ALL information you need is here

did you just do that or just print it?
i downloaded about 8 versions yesterday and none created 2 folders anymore!
i also tried the version from DataMan and got the same problem.

[megaraider]

Re: Need software for Intelligent universal programmer lk48

Here we go again:

1. Download:
'LT**UXP_1300_WIN7.exe' (~12.5MB)
or
'LT**UXP_1300_WIN10.exe' (~12.6MB)

2. Install.

3. Check installed folders ...\Labt00l-**UXP, and ...\Labt00l-**XP
Either win7 or win10 installation file will create both folders.

4. Patch the exe file:
For 'WLT**XP.exe @0x0003DF80 from 0x55 to 0xC3
For 'WLT**UXP.exe @0x0043DEF0 from 0x55 to 0xC3

And again, please do us all an obvious favor:
- Don´t post obvious strings: Advant3ch 3quipment, labt00l, ...
We really do not need the devil's search engine to find us...
- stop attaching large files widely available on internet to posts.
- use g00gle
- DIY - ALL information you need is here

[stj]

Re: Need software for Intelligent universal programmer lk48

no, single folder with the usb version in it
i think the download should be over 20meg

[PitMakot]

Re: Need software for Intelligent universal programmer lk48

This version have both folders

[stj]

Re: Need software for Intelligent universal programmer lk48

actually it looks like the fuckers have removed all the XP versions from the downloads!
i may look at wayback-machine later.

[stj]

Re: Need software for Intelligent universal programmer lk48

i think that works with both interfaces

[comatuning]

Re: Need software for Intelligent universal programmer lk48

but is presente exe only uxp, not exe for parallel port. i have labtool with only parallel port because usb is dead. on old pc with XP work fine, but old pc is dead

[stj]

Re: Need software for Intelligent universal programmer lk48

yes, in there is the exe file

[comatuning]

Re: Need software for Intelligent universal programmer lk48

look this photo