Need software for Intelligent universal programmer lk48

[megaraider]

Re: Need software for Intelligent universal programmer lk48

from ADV??

Yes, follow the 1st link on your own post.

[stj]

Re: Need software for Intelligent universal programmer lk48

from ADV??

[megaraider]

Re: Need software for Intelligent universal programmer lk48

did you just do that or just print it? [...]

Did it all myself yesterday, top to bottom! [Copy / paste is not my style ]
ALL fully tested under W7

[stj]

Re: Need software for Intelligent universal programmer lk48

Here we go again:

1. Download:
'LT**UXP_1300_WIN7.exe' (~12.5MB)
or
'LT**UXP_1300_WIN10.exe' (~12.6MB)

2. Install.

3. Check installed folders ...\Labt00l-**UXP, and ...\Labt00l-**XP
Either win7 or win10 installation file will create both folders.

4. Patch the exe file:
For 'WLT**XP.exe @0x0003DF80 from 0x55 to 0xC3
For 'WLT**UXP.exe @0x0043DEF0 from 0x55 to 0xC3

And again, please do us all an obvious favor:
- Don´t post obvious strings: Advant3ch 3quipment, labt00l, ...
We really do not need the devil's search engine to find us...
- stop attaching large files widely available on internet to posts.
- use g00gle
- DIY - ALL information you need is here

did you just do that or just print it?
i downloaded about 8 versions yesterday and none created 2 folders anymore!
i also tried the version from DataMan and got the same problem.

[megaraider]

Re: Need software for Intelligent universal programmer lk48

Here we go again:

1. Download:
'LT**UXP_1300_WIN7.exe' (~12.5MB)
or
'LT**UXP_1300_WIN10.exe' (~12.6MB)

2. Install.

3. Check installed folders ...\Labt00l-**UXP, and ...\Labt00l-**XP
Either win7 or win10 installation file will create both folders.

4. Patch the exe file:
For 'WLT**XP.exe @0x0003DF80 from 0x55 to 0xC3
For 'WLT**UXP.exe @0x0043DEF0 from 0x55 to 0xC3

And again, please do us all an obvious favor:
- Don´t post obvious strings: Advant3ch 3quipment, labt00l, ...
We really do not need the devil's search engine to find us...
- stop attaching large files widely available on internet to posts.
- use g00gle
- DIY - ALL information you need is here

[stj]

Re: Need software for Intelligent universal programmer lk48

no, single folder with the usb version in it
i think the download should be over 20meg

[PitMakot]

Re: Need software for Intelligent universal programmer lk48

This version have both folders

[stj]

Re: Need software for Intelligent universal programmer lk48

actually it looks like the fuckers have removed all the XP versions from the downloads!
i may look at wayback-machine later.

[stj]

Re: Need software for Intelligent universal programmer lk48

i think that works with both interfaces

[comatuning]

Re: Need software for Intelligent universal programmer lk48

but is presente exe only uxp, not exe for parallel port. i have labtool with only parallel port because usb is dead. on old pc with XP work fine, but old pc is dead

[stj]

Re: Need software for Intelligent universal programmer lk48

yes, in there is the exe file

[comatuning]

Re: Need software for Intelligent universal programmer lk48

look this photo

[comatuning]

Re: Need software for Intelligent universal programmer lk48

i dont have doble exe

[stj]

Re: Need software for Intelligent universal programmer lk48

on 13.00 try changing address 20591f = 55 >>> c3
i cant test it, i dont have the programmer and using windows makes me want to throw the laptop at the wall!

[comatuning]

Re: Need software for Intelligent universal programmer lk48

i try before 10.50 (for my use is good) and after other version, but whe install it, i have one folder with one exe (uxp)
Help me please
thanks

*****

[stj]

Re: Need software for Intelligent universal programmer lk48

so your using LT48UXP_1300_WIN7.exe ??

[comatuning]

Re: Need software for Intelligent universal programmer lk48

lol
posting a couple of hexadecimal numbers is not illegal - fuck them.
and iMac - use the latest version, not the old 12.40 one.
at the time i'm posting this, it's 12.60

hi,
i have labtool 48 xp and i try to modify software.
but my problem is when install it. i have only one folder in my pc and offset on software have another value
help me please

[stj]

Re: Need software for Intelligent universal programmer lk48

lol
posting a couple of hexadecimal numbers is not illegal - fuck them.
and iMac - use the latest version, not the old 12.40 one.
at the time i'm posting this, it's 12.60

[megaraider]

Re: Need software for Intelligent universal programmer lk48

it's only one folder C:\...\...\xyz-48UXP
Installed on a W10.

Install the version on the previous links, XP/Vista/7, only!
Use compatibility mode in w10 to install.

Please do us all an obvious favor:
Edit and remove all obvious strings: Advant3ch 3quipment, labt00l, ...
We really do not need the devil's search engine to find us...

[iMac]

Re: Need software for Intelligent universal programmer lk48

it's only one folder C:\Program Files\Advantech Equipment Corp\Labtool-48UXP

Installed on a W10.