A history of oscilloscope development in Vilnius

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Compgeke
    Badcaps Veteran
    • Feb 2014
    • 524
    • USA
    #21
    Re: A history of oscilloscope development in Vilnius

    From what I've heard they work alright but not great. Last person I know that had one used it for presentation uses since it was cheaper than a 'scope with any form of video out.

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • BOSCHNJAK
        by BOSCHNJAK
        ABOUT ME INTRODUCTION FILE

        2        024 BEV, BIH, SARAJEVO START PROJECT: ELECTRIC VEHICLE TOYOTA 4 RUNNER CONVERSION http://www.bev.ba/TOYOTA4RUNNER/index.html
        2023 BEV, BIH, SARAJEVO START PROJECT: SECRETS AND MANUFACTURING PLANS (AS MY REPLICA) OF THE LIBERTY ENGINE 2.0.
        2022 BEV, PROJECT ?
        2021 BEV, PROJECT ?
        2020 BEV,BiH, Sarajevo: PROJECT IS: HOW TO SWITCH OFF PERMANENT MAGNET FIELD and HOW TO SWITCH ON PERMANENT MAGNET FIELD?
        2019 BEV, Croatia, Ston:, Broce: PROJECT - PROJEKT ELEKTRIČNI GLISER http://www.bev.ba/ELEKTRICNIVANBRODSKIMOTOR/indexHR.htm...
        12-28-2023, 02:09 PM
      • Tarot Superstars
        How not to Damage an Oscilloscope
        by Tarot Superstars
        Hello.
        I have jut got my first analogue oscilloscope. An Isotech 620 20MHz.

        I want to learn how not to damage it, and I found instructions on the internet obscure.
        They talk about ground, earth, floating ground, this, that....
        But they don't actually say anything anything useful so far.

        I want to know:
        Don't connect exactly this to exactly there or it blows up.

        For example, I am tracing a signal from a function generator in an audio amp, or testing for voltages in different parts of a circuit.
        I want to know what not to connect...
        08-29-2023, 02:27 PM
      • Evets
        Dynamco analogue oscilloscope
        by Evets
        I have recently acquired a Dynamco D7100 analogue oscilloscope without a user manual. As this is the first time I have owned or used an oscilloscope I would like to try and find an instruction book. The manufacturers no longer hold any information and a Google search only found one site but when I downloaded a 'service manual' all I got was gobbledegook. Any help would be gratefully appreciated or even pointers to a generic manual where I could learn more.
        08-30-2024, 06:54 AM
      • SolomonMan
        Vintage BK Precision 1403 Oscilloscope....
        by SolomonMan
        All,

        Some of you have helped me in the past and I am very appreciative of all the help! (I have fixed TVs/Stereos/ and other small appliances with your efforts...Thanks so much!!!



        Today I went to a local HAM Radio Festival. It was one of the smaller ones in our area. My stepfather is the HAM operator. I tinker in electronics but am a Software Programmer (27 years now).

        I was looking for a few odds and ends for some electronics work I have to do for the household/farm. Typically these type of shows have the grab bags or a electronics vendor...
        12-03-2023, 10:39 PM
      • Bartoloni
        Lenovo S145 -15iwl vcore inductor warm.. looking with oscilloscope there is a spike.
        by Bartoloni
        Hi, i have a Lenovo S145 that after 20 seconds shutdown and restart (it's working correctly on thse 20 seconds)
        everything seems ok, but on Vcore inductor ( this is an i3 with just 1 switching power supply for CPU)

        there is an output to teh CPU with a spike.. seems that inductor can't handle the input...
        replaced the capacitor (330) and the inductor (R15) without any change
        any idea? very thank you!

        input of the inductor seems as usual... only strange thing is that the upper/lower voltages seems to be 21V (main power line is 19.3) ... but not sure this...
        12-09-2024, 12:42 PM
      • Loading...
      • No more items.
      Working...