HP CPTOH-0602 "Actually an LG"

[heavymachines]

Ok picked this up today for free 42" plasma and it is old manufactured in sept 2006 and it is an IPM Hybrid plasma.


Took the back off and started testing around sure enough as i suspected we have a shorted IPM on the X er Zmain same damn thing, VS is shorted to ground and 1 blown fuse out of 2. the guy i got it from told me the y main was replaced 4 years ago. IPM appears to be ok no shorts on Y main.


Now see if i can locate some parts as it may be very hard.

Getting genuine IPM may be impossible this day in age been some years since i dealt with a hybrid plasma. But it was straight forward on figuring out.

[heavymachines]

Re: HP CPTOH-0602 "Actually an LG"

Part number for the Z sustain is LG 6871QZH956A

Panel sticker is one that shows va and vs voltages is PDP42X3####
There is another panel sticker shows this part number PDP42X32002.

Now find out the STK numbers for the IPM.

[heavymachines]

Re: HP CPTOH-0602 "Actually an LG"

Substitute part number for IPM is STK-795-821

[heavymachines]

Re: HP CPTOH-0602 "Actually an LG"

Ok ordered Z-sustin. The IPM itself was more expensive like $38.95 from coppel not including shipping and the pain of changing it. Other sources was cheaper but from china and most likely fakes.

So the Z-sustin is going to set me back $29.00 and $8.00 in gas picking it up as it was 18 miles each way. So total is $37.00 Not bad. Stay tuned when i report results.

$37.00 is the total all i have into this set so far.

[heavymachines]

Re: HP CPTOH-0602 "Actually an LG"

certain you're supposed to replace both IPM in pairs but hey the last guy only replaced the y main and got 4 years of use. Not going to worry about it too much.

[heavymachines]

Re: HP CPTOH-0602 "Actually an LG"

Ok replacement z sustin is in and tv is alive and well