GWTN141-10BL help clean the region, and which version of Intel ME System Tools you need to use, I did not find. Thanks
-
-
Re: Please clean ME region on Gateway, dump added
Open the bios with MEAnalyzer and you'll find out.
Everything is described in detail in this topic.----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae.. -
Re: Please clean ME region on Gateway GWTN141-10BL, dump added
Thank for help, studying.Comment
-
Hello guys,
could I please get some help cleaning the ME region of the attached Zbook 17 G1 bios dump (CH341a, neoprogrammer, chip-desoldered, dumped twice, identical checksum)?
Symptoms, delayed BIOS post (ca. 45 secs.) keyboard not working, touchpad not working, booting linux live, console says "Management engine not configured".
I tried following the ME firmware cleaning guide, but whatever Flash Image Tool version I try, I get the same error:
Error 10: Failed to open with processed commands.
Unable to open file: C:\Users\Elitebook... -
Hello friends, i need a Gateway NV79 Bios dump with Motherboard label LA-5881P REV 1.0, somebody can share it please... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
hello everybody,
i have a problem with the bios dump that i found it here also in the forum.
the dump is working fine but with a delay 15-20 sec... to get a display after turning on the notebook.
the other problem is that im bios :
mac address (internal lan) not applicable.
can someone please clean the region and also take a look whats the problem with the mac address?
wifi is working also fine...... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70...
Comment