Hey got a mobo with two visibly bad caps. (first pic). I've read on someone else's post the 4 big green ones around the cpu went out as well. These particular ones on my board don't look bad. (next pic) But should I replace them anyway?? They are KZE 4700uf 6.3v .
Another Q, the two offending caps are G-Luxon 2700uf 6.3v I have some old caps that I took off a different board, they don't look bad but were part of a group of 9 that were bad around the CPU. They are a Nichicon 3300uf 6.3v My question is can I temporarily solder these in to see if they will make the board work? Or am I risking further damage to the board by them having a higher uf value or possibly being bad with no visible signs??
Thanks
Another Q, the two offending caps are G-Luxon 2700uf 6.3v I have some old caps that I took off a different board, they don't look bad but were part of a group of 9 that were bad around the CPU. They are a Nichicon 3300uf 6.3v My question is can I temporarily solder these in to see if they will make the board work? Or am I risking further damage to the board by them having a higher uf value or possibly being bad with no visible signs??
Thanks
Comment