View Single Post
Old 08-29-2018, 09:45 AM   #4
Badcaps Veteran
budm's Avatar
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 35,473
Default Re: Electron Kinetics Eagle 2C amplifier problem

1) As I indicated, no need to check the big caps or the rectifier since one channel is working.
2) Since you have two amplifiers, one is working and one is not then you can do the Voltage comparison readings between good amp and bad amp, just have to be careful not to slip the probes.
3) You can also do the resistance comparison readings too.
4) I see speaker fuses so check them out:
5) Make sure to put the wires back on correctly for those two filter caps!
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.

Voltage Regulator (LDO) testing:

Inverter testing using old CFL:

Tear down pictures : Hit the ">" Show Albums and stories" on the left side

TV Factory reset codes listing:

Last edited by budm; 08-29-2018 at 09:50 AM..
budm is offline   Reply With Quote