gateway GM5688E erroe code 8302

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tbird6820
    Member
    • May 2014
    • 10
    • usa
    #1

    gateway GM5688E erroe code 8302

    I have gateway GM5688e desktop.

    When I turn it on I have to press F2 first and it goes to setup than I press esc and hit enter

    Then I get a message: unknown bios error, error code =8302, press F2 to resume

    After that it loads but I have to do this every time I reboot.

    I have put a new battery in, the time and dates are correct.

    Can you help?
    Tags: None
    • dj_ricoh
      Badcaps Legend
      • Jan 2013
      • 2073
      • uk
      #2
      Re: gateway GM5688E erroe code 8302

      Update the bios!
      then you can boot normal.
      Cheers!
      Just cook it! It's already broken.

        Comment

        • tbird6820
          Member
          • May 2014
          • 10
          • usa
          #3
          Re: gateway GM5688E erroe code 8302

          Ok that sounds great but do you have alittle more information on where I could get this update?

          do I need 2 buy this or can I get this for free?

          that's why I'm posting, if I knew this, I wouldn't b wasting my or your time.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Document Archive
              LCD LED TV Service Menu Codes
              by Document Archive
              ALL LCD LED TV SERVICE MENU CODES

              Service Menu Code with Board Name

              China Universal Board / Jumper Board Service Menu Code
              Changhong Ruba Service Menu Code
              Ecostar LED TV Service Menu Code
              Orient LED TV Service Menu Code
              Haier LED TV Service Menu Code
              TCL LED TV Service Menu Code
              Samsung LED TV Service Menu Code
              LG LED TV Service Menu Code
              Videocon LED TV Service Menu Code
              Supra LED TV Service Menu Code
              Toshiba LED TV Service Menu Code
              Symphony LED TV Service Menu Code
              Veste/ LED TV Service Menu Code...
              10-31-2024, 03:58 AM
            • Woodsworth
              PS3 CECHC03 60GB YLOD Troubleshooting
              by Woodsworth
              I have a post on psx-place for this but thought I'd try here as well in case anyone has experience or the schematics or any kind of help. Here's the original post from psx-place:
              START
              Hi, so I bought a YLOD Fat PS3 as I wanted a repair project and thought it would be a good way to get experience. I was able to solder to the RX, TX and Diag pads on the COK-002 motherboard and was able to get external access and retrieved the codes. I haven't powered it on beforehand so these should be the last ones. I did try to get internal access immediately after but kept getting scopen response...
              03-19-2024, 07:58 AM
            • Sorrow1
              Intergraph TDZ 2000 mainboard post code 2F/2E
              by Sorrow1
              Hi,

              I try to repair an old Intergraph TDZ 2000 from 1998. It is a dual Pentum II machine based on Intel 440LX chipset. There is a non-removable bios chip named PhoenixBios B1787840. I cannot see any physical damage to the board. All caps look OK.

              It shows no picture and POST stops with code 2F/2E regardless whether or not any graphic card is plugged in. If memory is removed, it stops on previous code 28/17 and stars beeping. I tested both CPUs in another machine and I also use RAM from another machine.

              When I recorded video of POST card and played it in slow...
              01-03-2024, 04:13 AM
            • DynaxSC
              MSI PRO Z690-A DDR4 (MS-7D25) - stuck during boot every second time - debug code 16 & A1
              by DynaxSC
              Hi Folks

              I have an MSI PRO Z690-A DDR4 (MS-7525) which underwent LGA1700 replacement and had a missing resistor in the VRM section. The missing resistor RV170 (49,9Ω) has been resoldered, and I have also replaced a demaged LGA1700 socket.

              Generally the board does boot to Windows, but not always in the first attempt, but after the second attemp to boot the board with Power Button. Also restarting the board from Windows ends up with stuck boot process, but restarting the board again (long push Power Button or switching off and on PSU). Under Windows etherything works              ...
              09-29-2024, 04:27 PM
            • cloo
              Panasonic ZT60 plasma tv with strange behavior and 8 blink code
              by cloo
              I recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
              It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.


              So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
              After doing a factory reset this problem was gone and the picture was back to...
              01-06-2025, 06:02 AM
            • Loading...
            • No more items.
            Working...