Hey guys I was wondering if any of you could help me with re-making this DIY project I found online. Original link is here: http://www.thegsresources.com/_forum...d.php?t=182719
Basically I can't find the parts he lists on digikey but I'm also pretty new at all of this. I've fixed a few electronics and I'd really like to give this project a try. I think the basic problem here is I'm too clueless to understand what he's listing in his parts list...
Anyone have any advice on where to get custom pcbs printed? It seems like the cheapest place I found is OSH Park, anyone care to share experiences?
So here are some pictures and the parts list:
Parts list
D1,D11,D21 = 1N4007
Q11,Q12,Q13,Q21,Q22,Q23 = 2SC1959
Q01 = 2SK163
Q14,Q24 = 2SD977 or 2SD1976
if use the type 2SD1976 you dont need use Z11 & Z21
Z11 Z21 = ZY350v /1,3W
Z01 = ZD4,7/1,3W
R11, R21 = 1K
R12, R22 = 3,9K
R13, R14, R15, R16, R23, R24, R25, R26 = 4,7K
R18,R28 = 300 ohm
R19,R29 = 470 ohm
R17, R27 = 300 ohm 2W
C01 = 100nF/63v
C02 = 100μF / 63V/105°
C11, C21 = 22nF/63V
C12, C22, C13, C23 = 10nF/63V
C14, C24 = 150nF/400V
Basically I can't find the parts he lists on digikey but I'm also pretty new at all of this. I've fixed a few electronics and I'd really like to give this project a try. I think the basic problem here is I'm too clueless to understand what he's listing in his parts list...
Anyone have any advice on where to get custom pcbs printed? It seems like the cheapest place I found is OSH Park, anyone care to share experiences?
So here are some pictures and the parts list:
Parts list
D1,D11,D21 = 1N4007
Q11,Q12,Q13,Q21,Q22,Q23 = 2SC1959
Q01 = 2SK163
Q14,Q24 = 2SD977 or 2SD1976
if use the type 2SD1976 you dont need use Z11 & Z21
Z11 Z21 = ZY350v /1,3W
Z01 = ZD4,7/1,3W
R11, R21 = 1K
R12, R22 = 3,9K
R13, R14, R15, R16, R23, R24, R25, R26 = 4,7K
R18,R28 = 300 ohm
R19,R29 = 470 ohm
R17, R27 = 300 ohm 2W
C01 = 100nF/63v
C02 = 100μF / 63V/105°
C11, C21 = 22nF/63V
C12, C22, C13, C23 = 10nF/63V
C14, C24 = 150nF/400V
Comment