Someone at Opera was inhaling something!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RJARRRPCGP
    Badcaps Legend
    • Jul 2004
    • 6304
    • USA
    #1

    Someone at Opera was inhaling something!

    Why?

    I installed Opera 12.11 build 1661 and the default page draw delay was set to 3 seconds!

    Previous versions were set to 1 by default.

    Whoever did this at Opera only is only causing bad publicity.

    Epic fail for defaulting to satellite-like delays!
    ASRock B550 PG Velocita

    Ryzen 9 "Vermeer" 5900X

    32 GB G.Skill RipJaws V F4-3200C16D-32GVR

    Arc A770 16 GB

    eVGA Supernova G3 750W

    Western Digital Black SN850 1TB NVMe SSD

    Alienware AW3423DWF OLED




    "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

    "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

    "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

    "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • pb1911nt
      MacBook Pro A2251 - 820-01949 Voltage Drop and unkown issues.
      by pb1911nt
      Hello forum,

      I'm still relatively new to the world of electrical repairs.

      I have a Macbook here that I can't figure out

      When the battery is gone, the USB input consumption goes up to 20 V and 0.06A. But it breaks down after about 2-3 seconds and you can also hear a small ticking on the logic board. But I can't pinpoint it exactly.

      I removed the logic board and took a few measurements.

      But I can't really figure it out.

      At first I thought the infamous CD chip was defective - but then of course you read more on the internet...
      09-07-2025, 11:35 AM
    • ahmedtou
      HOW CAN I UPDATE HL-DT-ST BD-RE GGW-H20N XA02
      by ahmedtou
      Hi everyone,
      help me please


      I have an HL-DT-ST BD-RE GGW-H20N with ROM version: XA02.



      When I tried to burn a 25GB Blu-ray disc using ImgBurn, I got an error.
      I will share all the details with you, including the disc information.



      Code:
      HL-DT-ST BD-RE  GGW-H20N XA02 (ATA)
Current Profile: BD-R

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 12,219,392
Free Space: 25,025,314,816 bytes
Free Time: 2715:27:17 (MM:SS:FF)
Next
      ...
      08-27-2025, 08:49 AM
    • Leebo249
      SA-HD52 1 Default Crosstalk/static after replacing selector switch IC?
      by Leebo249
      Hey,

      A month back I replaced the selector switch IC on my Panasonic SA-HD52 as the radio was still playing when I selected the CD, it did this with the tape and record too.

      Now when I replaced the IC it worked perfectly, no cross talking and I left it at that for a month and have come to it today to play a CD (you can hear it spinning) and the issue has come back although with another issue.

      Both issues are random, the original problem where the radio will play over other playbacks has come back and another time you turn it on it will refuse to play anything,...
      09-07-2025, 07:23 AM
    • YG007
      Asus BIOS How To Reset To Default Settings?
      by YG007
      Hello... Where do I start. I have 2 questions/scenarios that might bring this laptop back to life, so here it goes!

      I have this laptop (Asus UX52VS) where I was flashing the BIOS to it and it froze during the process. I didn't have a reliable BIOS chip programmer at the time (It was a CH341A USB Programmer from Amazon where it took hours just to get the clamp on the chip and then every time I read, it gave me different results/corruption, and never would pass the verify test as no 2 reads were the same data), so I brought it to a shop. They had it for almost 2 months, but during...
      06-05-2023, 08:22 PM
    • japlytic
      Gigabyte Z690 UD AX DDR4 distingusihing failures+default video
      by japlytic
      On this motherboard with a CPU (requiring discrete graphics) supported by the BIOS (version F3) and a new video card, it has a beep code indicating a CPU failure while the onboard diagnostic LEDs indicate a video system failure and using a different motherboard of the same model had the same result despite confiriming that the new video card along with the power supply as well as the connected display/cable was operational in another system.
      So therefore, I've found that the Video diagnostic LED illuminated before CPU diagnostics were performed and since the CPU has failed, video diagnostics...
      12-30-2022, 11:12 PM
    • Loading...
    • No more items.
    Working...