Dragging pictures from Aperture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • burntfingers
    Senior Member
    • Jan 2011
    • 148
    #1

    Dragging pictures from Aperture

    My iphoto crashed, and my son gave me a copy of Aperture, which works just fine.
    The problem is that when dragging pictures from Aperture to any other place [spare HD or a flash drive] they are automatically reduced in size - to around 30-40 kb or even less [if the original file is small].

    What's the problem?

    When I export, it seems to work OK [also something funny with some files...].
    Tags: None
    • burntfingers
      Senior Member
      • Jan 2011
      • 148
      #2
      Re: Dragging pictures from Aperture

      Hi, guys.
      Where should I go to have a solution for this strange to me problem?

        Comment

        • burntfingers
          Senior Member
          • Jan 2011
          • 148
          #3
          Re: Dragging pictures from Aperture

          I've been reading through some Internet information for Mac, but still can't figure this one out, damn it!

          http://mac.bigresource.com/Aperture-...html#i5oOUz14b

          When I drag picture files from Aperture to desktop or any external device, the files get drastically reduced in size.
          Even when I export them.

            Comment

            • burntfingers
              Senior Member
              • Jan 2011
              • 148
              #4
              Re: Dragging pictures from Aperture

              Got to work around this problem.
              Saved my pictures to a new folder in desktop, and then copied them to the external HD.
              Some old pictures [without master information] did not save.

              But the original problem still persists: when dragging from Aperture, the files are drastically reduced in size - and I don't know WHY!!...

                Comment

                Previous template Next

                Related Topics

                Collapse
                • bohaboha
                  Samsung UE70TU6905 BACKLIGHTS AND SOUND ON NO PICTURES BUT SCREEN NOT DARK
                  by bohaboha
                  Hi it looks like everything works don't know where to test except the 390v in the 2 capacitor in the hot side of the power supply and the weird 180v in the diodes in the cold side that should be discharged it is writin on the circuit no more you can read what is written on the circuit quite srrange color mixiing yellow and white
                  anyhow i couldn't t read anything else
                  the backlight is on strong and the screen does not get dark or very dark but no pictures
                  the mainborad feels a bit hott on the black part i test it to 52 degree's against 34 to 40 on the rest of it
                  ...
                  01-02-2025, 08:04 PM
                • valvashon
                  LG 55UH6150- trouble powering up, then half lit screen (pictures!)
                  by valvashon
                  The 55" LG has been in the basement for a few months without being used. Turned it on yesterday, set came on as it should and showed a complete screen for about 5 seconds (was on a broadcast channel but no antenna was connected), then the screen went mostly dark with about 1/3 of the screen on the right lighting up with brighter lines in that lit part (sorry, no pictures of that). Power LED was cycling too, preventing the TV from fully powering up.
                  Pulled the back off, all boards looked OK. Pulled the LED connector, turned the set on to see if it would power up but I don't belive it...
                  11-24-2024, 12:08 PM
                • 2elw
                  SVOD4 PCB pictures + parts
                  by 2elw
                  Hey, I find it very absurd that the SVOD4 costs so much and has zero documentation. I had no other choice than to buy it to unlock ECs, if there was any documentation or firmware avalible I could've made it or something simmilar. Anyways here are some of the most important parts:

                  STM32H723VGT6 MCU - It's a microcontroller by STMicroelectronics and its the whole brain of the SVOD4. It has flash memory for the firmware which can be updated by the SVOD4 program. Its also powered by the AMS117 which converts 5v into 3.3V. 7€ on AliExpress.

                  GW1N-UV9UG169C6/I5 FPGA - Its a...
                  07-04-2025, 12:23 PM
                • VitalComputing
                  Taking Pictures Of Large Circuit Boards
                  by VitalComputing
                  Hi friends,

                  I am trying to take good quality pictures of rather large desktop motherboards for a project I'm working on. I had a brilliant idea of scanning them with a flatbed scanner I have but it only focuses on the bits of the board that are flush to the scanning glass. And the through hole components tend to lift the main board from the scanning glass. Everything else just looks out of focus. So it seems that that option wont run.

                  I have been capturing the images with my iPhone 11 and it's okay but wont capture the whole board. I have to grab it in sections and...
                  11-22-2022, 04:15 PM
                • howardc64
                  Vizio M557-G0 1/2 panel VGHD LC1 (and maybe XON VSSQ LC2) Problems
                  by howardc64
                  Failure Symptom

                  No Display. Just random blocks of grouped vertical red lines.
                  Disconnect right 1/2 panel (rear view), left 1/2 displays properly

                  Masking T-Con Signal Diagnostic

                  Reduced masking to 5 signals on right 1/2 panel and get perfect picture

                  Pins are

                  1 GND
                  2 VGHD
                  3 XON
                  4 VSSQ
                  5 LC2
                  6 LC1

                  VGHD and LC1 masking is absolutely necessary to get working panel. Didn't unmask 3-5 individually.

                  Pictures and Schematic

                  XON, LC2, LC1 are on AUO s302-21 32pin QFN...
                  10-14-2024, 01:30 PM
                • Loading...
                • No more items.
                Working...