Really sorry , Another programmer question.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dan20701
    Senior Member
    • Sep 2020
    • 199
    • United Kingdom

    #1

    Really sorry , Another programmer question.

    RT809H or Vertyanov or Svod4 Programmer?

    Hallo all, I am sorry for asking this I am sure its been covered before
    I just can't find any posts on it, I have looked.

    I would like a new programmer for these types of chips, ITE, ENE, Nuvoton, KP, SMSC.

    Any recommendations? I am thinking of getting the RT809H, the Svod4 seems a little bit pricey with all the add-ons.

    Is the RT809H an online programmer do I need to be online with it?

    Are there any do's and don'ts , what one would you go for ?.

    Thanks for any replies.

Related Topics

Collapse

  • Teeheeze
    RT809H Programmer Firmware Corrupted
    by Teeheeze
    This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone...
    02-13-2025, 04:51 PM
  • sassan
    The new xgecu T76 vs rt809h programmer
    by sassan
    hello,

    i want to buy a new programmer mainly for use for laptops bios chips and i'm between the Xgecu T76 and the famous RT809H.
    i think that T76 is faster wich makes it the best choice for using Pogo pins,i asked the support if it supports Mec ships found on some Lenovo laptops i didn't get an answer yet.

    i would like some ideas and which one do you recommend?...
    03-06-2025, 05:36 AM
  • bembeno
    aquestion about RT809h programmer
    by bembeno
    dose RT809h programmer support the new Bios chips like 25q256jveq because i have minipro TL866 and icant programming these ics and if anyone can tell me about a cheaper programmer wich do the same job to buy it
    03-04-2023, 02:39 PM
  • STKR123
    The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
    by STKR123
    Greetings badcaps community,

    I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
    So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

    Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

    I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

    These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

    I learned that desoldering...
    10-29-2024, 06:03 AM
  • 2elw
    SVOD4 PCB pictures + parts
    by 2elw
    Hey, I find it very absurd that the SVOD4 costs so much and has zero documentation. I had no other choice than to buy it to unlock ECs, if there was any documentation or firmware avalible I could've made it or something simmilar. Anyways here are some of the most important parts:

    STM32H723VGT6 MCU - It's a microcontroller by STMicroelectronics and its the whole brain of the SVOD4. It has flash memory for the firmware which can be updated by the SVOD4 program. Its also powered by the AMS117 which converts 5v into 3.3V. 7€ on AliExpress.

    GW1N-UV9UG169C6/I5 FPGA - Its a...
    07-04-2025, 12:23 PM
  • Loading...
  • No more items.
Working...