I removed these Yihcon caps from a K-Mex 450W PSU and replaced them with Panny FJ and Chemi-con KZE. They look very similar to the single Fuhjyyu that was also in this PSU and the Fuhjyyu caps I have removed from Antec PSUs. Do you guys think that they are re-badged Fuhjyyu caps?
Re-Badged Fuhjyyu?
Collapse
X
-
Re-Badged Fuhjyyu?
I love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 ProTags: None
Related Topics
Collapse
-
by momakaMore eBay specials: this time a Gigabyte GP-P450b 450W ATX PSU for $8 with free S&H. Listed “For part/not working”, as usual. Showed up in a beat up EVGA box without any padding… but that's understandable given the total price. PSU made it out fine without damage. It's a non-modular (yay!), pretty modern-day looking PSU with a black paint and all black cables (meh, not my favorite, but figure it's good to keep a few of these in case I do need one for a more modern PC build, just so my old gray boxes don't look too odd in there.)
And a shot of the label:... -
by Kashi1712Hello all,
I have a veineda 1660super ( this is a rebadged pny 1660super xlr8, same pcb, same fans, same cooler)
Card is working fine, sensors reports fan speed at 32% but they are running at 100%. I thought it was only a fan issue, so decided to replace them but still same issues.... Wondering if I've not a problem with wiring.
Could someone that have one of both veineda or pny, post the cable wiring for the fan? (Color and order) or send the model of fans' on yours?
Also, if somebody have multimeter reading for each pin for the fan...08-30-2023, 12:00 PM -
by mrdevilHi all,
Wanted to share this as I couldn't find anything on the internet about this problem, so pulled one apart and found the problem myself. Years ago I bought approx 20 or so Crest Smart Home Single Power Adapter smart switches - small 240v Tuya-compatible (rebranded) smart switch devices with power monitoring, which Big W had on sale for half price. Paid $7.50 each for these, and they've been incredibly useful for turning things on and off remotely... and monitoring how much power each device uses.
However, after about 12 months, I had a number of these stop working... -
by AdrenalinTLHowdy peeps.
Can someone tell me where to get another one of these? google doesn't seem to have a 560uF and I am still quite a newbie to the whole world of electronics so trying to learn as I go. The one to the right of this pic is definitely swollen. PSU does random shut downs / no power on etc
Also, can it be replaced with a higher uF cap ? Same voltage?
Thanks... -
by harpI have a little question regardless a way to repair ATX power supply CHIEFTEC MODEL: GPS-450AA-101 A. It is 450w power for computer.
The psu has initial short on +5VSB (purple), and I found and replace shorted diode SB340. After replace, unpowered measurement of all outputs seems fine. All other big double diode on heatsink are ok in secondary side. I connect psu with 60w bulb in serial, and bulb shortley flash as it would be. There is steady 5.2v on +5VSB and PS-ON, on any other is nothing, like 0.00v. So the primary is ok, right?
But, when I PS-ON (green) connect, bulb... - Loading...
- No more items.
Comment