Samxon GA

slavun

New Member

Join Date: Feb 2009

Posts: 2
#1

Samxon GA

02-13-2009, 03:44 PM

Hi to All,
This is my first post here. I would like to know whether it is good to replace KZG's with Samxon GA for the Vcore(the ESR difference is nearly twice). My board is DFI NF2 Infinity and the caps are almost "dead".

http://www.bgsportal.blogspot.com/
Tags: None
PCBONEZ

Grumpy Old Fart

Join Date: Aug 2005

Posts: 10661

Country: USA
#2

02-13-2009, 03:56 PM

Re: Samxon GA

That's a good choice.

Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment

Previous template Next

Looking for Dump for P87C51SBPN (Concord Infinity Elevator)

by vlady carp

Hello, colleagues!

I'm currently dealing with an issue while repairing a Concord Infinity elevator. The microcontroller P87C51SBPN used in the control board has failed, and I need the original firmware dump in .bin format to replace it with a new processor.

What I've done so far:
• Diagnosed the issue and confirmed the microcontroller is the root cause of the problem.
• The original processor is beyond repair, and I wasn't able to extract the dump.
• Reached out to the manufacturer (Savaria/Concord), but I haven't received a response yet.
...

1 Photo
- Channel: Schematics and Boardviews
01-16-2025, 02:08 AM
Can I replace KME cap with Samxon GF cap?

by chth96

Hello.
I have 29inch LG CRT TV,And Yesterday,Whenever I connect AC power cord to power outlet without switch on, I heard a sound like white noise, And When I switched on this CRT TV, It sometime displayed correctly But usually It won't last more than 20 minute and The screen begin to dark and It finally did not display at all for hours..
Today,I dismantled its plastic case and discharged the biggest capacitor(400wv 470uf) which still holds 250 voltage,and I finally detached PCB from cathode-ray tube.
I measured ESR value of most of caps in PCB with MESR-100 and I found that KME(25v...
- Channel: General Capacitor Questions & Issues
04-17-2024, 07:11 AM
Dell Alienware M16 R1 AMD (Infinity A+N MB1 213199-1 Y5J11$CA) schematic

by Omar Villalba

Good morning, colleagues.
I'm looking for the schematic or boardview for a Dell Alienware M16 R1 AMD (Infinity A+N MB1 213199-1 Y5J11$CA).
I would really appreciate it if someone could share it.

My main issue is that the backlight is not working. I found fuse F5503 to be blown; I replaced it, but it blows again (goes into protection).
It's worth noting that there's no short on the fuse line, so any guidance or similar experience would be greatly appreciated.
- Channel: Schematic Requests ONLY!
08-12-2025, 09:21 AM
Samxon capacitor esr

by GEARELECTRONICS

Hi all,
I need your advice.
-SAMXON 2200uf 50V tested 0.00 esr on Dick Smith Blue Esr meter and 2027 ohm on FLUKE 179 multimeter.
-Is this esr reading realistic?
Thank you
- Channel: General Capacitor Questions & Issues
05-29-2023, 07:26 AM
Kenmore electric range replacement infinity switch?

by CapLeaker

Actually this range had multiple problems but I fixed all the others already.

I am stuck finding a replacement infinity dual burner switch for a Kenmore C970-605121. The dual burner is stuck full on as soon as you turn the knob either side, either the difference of either only one or both burners running full tilt.
I tried cleaning it inside contacts, but that didn’t do anything.

I believe the dual burner switch reads a part number of: 318191021 which is hard to find. I came across a 318191026 part number but it has 2 pins on the row missing. Is there anything...
- Channel: Troubleshooting Appliances and other Household Electronic Stuff
05-14-2023, 12:03 PM
Loading...
No more items.

Samxon GA

Comment

Related Topics