Cap replacement!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nstlfrk
    Senior Member
    • Apr 2014
    • 166
    • United States
    #1

    Cap replacement!

    Quick question if any one would feel like helping. Since it has been a while here is my question.

    I am replacing 2 680uf 35V Caps and I am trying to remember what all I can use in its spots as in voltage and UF sizes. Can you all suggest a decent exchange as I have many caps but not the exact match?

    Thank you in advance for any help or information
    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: Cap replacement!

      You need a cap with higher Uf than 680Uf and high or same voltage as 35v.
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain
          #3
          Re: Cap replacement!

          Say for example if you have a 470uf 35v cap and a 220uf 35v cap you can put them in parallel to make 690uf cap but it will look bodged.
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            • nstlfrk
              Senior Member
              • Apr 2014
              • 166
              • United States
              #4
              Re: Cap replacement!

              Thank you for the help I was able to fix my item

                Comment

                Previous template Next

                Related Topics

                Collapse
                • the_rem
                  Unknown transformer : how to find a good replacement part ?
                  by the_rem
                  Hello guys,

                  I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.

                  I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
                  VEF20FB07BW(2025001A)20110927.pdf
                  https://drive.google.com
                  04-23-2025, 01:48 AM
                • ezenia
                  PS4 controller left stick potentiometer replacement issue
                  by ezenia
                  Hello,

                  Not sure if this is the correct section, but I have a PS4 controller that I am trying to fix. It developed stick drift on the left stick and the usual simpler methods did not fix the problem.

                  So I went on eBay and ordered some replacement potentiometers. https://www.ebay.co.uk/itm/174967976757 is where I got them from.

                  I took the green potentiometers off the replacement sticks and soldered them onto the PCB. Assembled the controller and ran some tests. The drifting was somewhat fixed (not fully in center, but way better than before). However,...
                  09-30-2023, 02:19 PM
                • boosti45
                  Macbook pro logic board replacement parts quesion
                  by boosti45
                  i have a 2020 macbook pro 13" A2251 with 820-09149 logic board so i found an issue with chip labeled U6903 according to schem. boardview using flexBV software, so i removed it from the board and the issue im having is that the chip says "07A08FI ELC180​" on top of it but when searching for a replacement chip, i can find tons of identical looking chips that also have "ELC180" printed on them but the first set of digits is never the same so im trying to find out if i need this exact chip with these same numbers as mine and if not which ones are compatible as a replacement?...
                  08-21-2024, 05:23 AM
                • Javiercity
                  [B][/B]Sharp 80" lc-80le661u dark spots/shadows
                  by Javiercity
                  Hello there i have a Sharp 80" LDC that has some dark spots in the middle of the screen, since its a 80 inch need another person so hang it on the wall or move it around, so i hope the collective wisdom can help me to determine what is wrong, I've been doing some research online and there is next to nothing about this TV, i tend to believe that the spots are due the back films/diffuser sheets, that are bit dirty, or perhaps one or two LEDs being burned, but what throws me off is that the dark spots are more noticeable when the image is bit dark like night scenes, and also noticeable when...
                  06-13-2023, 12:02 PM
                • r2digital
                  klipsch kda-500 amplifier suitable power supply capacitor replacement ?
                  by r2digital
                  I have a klipsch kda-500 that would turn on and allow me to get into the web management but it was picking up a lot of noise from audio sources so i decided to replace the smd caps on the power supply along with radial one. Some one was in here before me and they basically burned the bottom side of the traces off for the radial cap but i was able to repair it without any real problem. I thought i did a good job sourcing out replacement caps but apparently not and now i can't get the power supply to turn on it just constantly try's to keep turning on. Attached is a picture of the power supply before...
                  2 Photos
                  04-18-2024, 03:50 PM
                • Loading...
                • No more items.
                Working...