Need Advice In Choosin Replacement Caps.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • noobzed
    New Member
    • Mar 2007
    • 4
    #1

    Need Advice In Choosin Replacement Caps.

    Hi, I want to replace caps on my ADI1988 sound card, there are 12 caps, 6 x Sanyo 330uF 6.3V 6mm diameter, and 6x Unknown brand 10uF 25V 4mm diameter. I spoke with BigPope on msn about the 10uF caps these are cheap caps. These are pvc electrolytic caps, I want replace with solid caps, I have found a website who sell some caps, here the links to these caps.

    May I have a advise in my choice ? cause do not want to break my sound card ...

    Pics of the card itself :


    Here the links to the caps I have choose with BigPope :

    ATM the website is down for maintenance...

    I can input the reference:

    - Sanyo 10SEP330M, Solid caps, 330uF 10V 6mm diameter
    - Sanyo 20SEP100M, Solid caps, 100uF 20V 6mm diameter

    ==> To replace Sanyo ecaps 330uF 6.3v 6mm diameter
    ( NE6N XM 105°C 330uF 6.3V Sanyo 6mm, written on the original caps )

    And for the 10uF don't remember the ref...
    ( KMA (N) 105°C 10uF 25V 4mm, original caps )

    Thanks,
    S.
    Last edited by noobzed; 03-16-2007, 03:16 PM.
    Tags: None
    • willawake
      Super Modulator
      • Nov 2003
      • 8457
      • Greece
      #2
      Re: Need Advice In Choosin Replacement Caps.

      i doubt you will hear any improvement in sound quality with replacing caps on that card.
      capacitor lab yachtmati techmati

        Comment

        • noobzed
          New Member
          • Mar 2007
          • 4
          #3
          Re: Need Advice In Choosin Replacement Caps.

          Aesthetic purpose, could you tell me if I'm right or wrong with reference replace caps ?

            Comment

            • willawake
              Super Modulator
              • Nov 2003
              • 8457
              • Greece
              #4
              Re: Need Advice In Choosin Replacement Caps.

              nope i dont do aesthetic
              capacitor lab yachtmati techmati

                Comment

                • noobzed
                  New Member
                  • Mar 2007
                  • 4
                  #5
                  Re: Need Advice In Choosin Replacement Caps.

                  You cannot say me if I make a mistake in my choice ?

                    Comment

                    • Topcat
                      The Boss Stooge
                      • Oct 2003
                      • 16956
                      • United States
                      #6
                      Re: Need Advice In Choosin Replacement Caps.

                      Those sanyos won't give you any trouble. I'd be far more worried about your mainboard or PSU.
                      <--- Badcaps.net Founder

                      Badcaps.net Services:

                      Motherboard Repair Services
                      ----------------------------------------------
                      Badcaps.net Forum Members Folding Team
                      http://folding.stanford.edu/
                      Team : 49813
                      Join in!!
                      Team Stats

                        Comment

                        • noobzed
                          New Member
                          • Mar 2007
                          • 4
                          #7
                          Re: Need Advice In Choosin Replacement Caps.

                          Mobo is all solid caps.

                          Topcat, is my choice ok ?

                            Comment

                            • kc8adu
                              Super Moderator
                              • Nov 2003
                              • 8832
                              • U.S.A!
                              #8
                              Re: Need Advice In Choosin Replacement Caps.

                              those would work but no good reason to do it other than bragging rights?

                                Comment

                                Previous template Next

                                Related Topics

                                Collapse
                                • momaka
                                  Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
                                  by momaka
                                  I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

                                  For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

                                  https://www.badcaps.net/filedata/fetch?id=3591771


                                  https://www.badcaps.net/filedata/fetch?id=3591772

                                  It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

                                  https://www.badcaps.net/filedata/fetch?id=359177...
                                  03-12-2025, 03:42 PM
                                • eryjus
                                  Heathkit IO-4205 Power Supply Caps
                                  by eryjus
                                  Hello,

                                  First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

                                  I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

                                  I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
                                  ...
                                  05-10-2023, 11:21 AM
                                • Paxman_Swede
                                  Identifying caps on an old Zoom 9000
                                  by Paxman_Swede
                                  Hello!

                                  I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

                                  The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

                                  I have studied the board and...
                                  01-14-2025, 09:51 AM
                                • captain150
                                  Help with switching power supply caps
                                  by captain150
                                  I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
                                  I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
                                  03-16-2025, 07:34 PM
                                • Foetuss
                                  Gigabyte GA-6OXT :: caps question
                                  by Foetuss
                                  Good evening

                                  I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
                                  Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

                                  But I was also suprised about the bigger boys, which are 330µF 25V.
                                  Could it be they used 25V caps because they were cheaper / available at that time?...
                                  02-11-2025, 12:22 PM
                                • Loading...
                                • No more items.
                                Working...