Help IDing some caps

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hAvAAck
    New Member
    • Dec 2013
    • 4
    • USA
    #1

    Help IDing some caps

    Hi all. I'm trying to replace some capacitors on my Onkyo TX-SR607 receiver's HDMI board. I count 4 different types. I think they are Nichicon. I'm trying to figure out what they are and what size they are, so I can order some replacements. I have my guesses, but I don't know what I'm doing!

    They are aluminum electrolytic capacitors, that is about the only thing I know for sure.

    E2 470A CD


    E2 220 4V


    E2 100 4V


    D3 220 4V


    My guess is 3 of them are 4-volt and 220/100 microfarads. No idea what the 470A would be. Any help would be greatly appreciated!
    Tags: None
    • Pentium4
      CapXon Be Gone
      • Sep 2011
      • 3741
      • USA
      #2
      Re: Help IDing some caps

      You're right on the last 3. The first one is indeed nichicon, CD series 470uF 10V

        Comment

        • c_hegge
          Badcaps Legend
          • Sep 2009
          • 5219
          • Australia
          #3
          Re: Help IDing some caps

          The last three are probably also Nichicon.
          I love putting bad caps and flat batteries in fire and watching them explode!!

          No wonder it doesn't work! You installed the jumper wires backwards

          Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

          Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

            Comment

            • hAvAAck
              New Member
              • Dec 2013
              • 4
              • USA
              #4
              Re: Help IDing some caps

              Thanks! Is there any way to know the dimensions via identification, or should I just bust out the calipers?

                Comment

                • mariushm
                  Badcaps Legend
                  • May 2011
                  • 3799
                  #5
                  Re: Help IDing some caps

                  A basic ruler should be enough. The distances between those pads are relatively standardized.
                  You could also use through hole capacitors and just bend the leads a bit so you could solder them on the pads. It will look ugly but it would work.

                  Why are you trying to replace them in the first place? Do you know they're bad or it's just preventive?

                    Comment

                    • hAvAAck
                      New Member
                      • Dec 2013
                      • 4
                      • USA
                      #6
                      Re: Help IDing some caps

                      My HDMI ports are all not working and because of the heat inside the chassis, the most likely culprit are the capacitors on that board. I figure I'll just replace them all and if it starts to work again, great. If not, at least I tried!

                        Comment

                        • ben7
                          Capaholic
                          • Jan 2011
                          • 4059
                          • USA
                          #7
                          Re: Help IDing some caps

                          Originally posted by hAvAAck
                          My HDMI ports are all not working and because of the heat inside the chassis, the most likely culprit are the capacitors on that board. I figure I'll just replace them all and if it starts to work again, great. If not, at least I tried!
                          Errr, hmm, it seems on TVs that most HDMI problems are from the actual HDMI interface IC going bad. Not sure if it is the same in this case.

                          Have you checked the output voltages of the voltage regulators on that board?
                          Muh-soggy-knee

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • nick3092
                              Mid/late 80's Nichicon Yellow Caps
                              by nick3092
                              I recently acquired a set of Bose Roomate speakers from the mid to late 80's. Basically the right speaker cabinet is completely passive, and the left one has the power transformer and amplifier circuit in it. Out of curiosity, I opened it up to see what the circuit looked like. Looks like they used all Nichicon VX (2x 4700uF/16v for smoothing off the bridge rectifier), a couple random Nichicon SE series sprinkled on the board, and what really caught my eye - 2 yellow sleeved Nichicon caps (both 1uF/50v with no real series marking. Below are pictures of the caps. The only thing not shown in these...
                              08-28-2022, 03:56 PM
                            • momaka
                              Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
                              by momaka
                              I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

                              For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

                              https://www.badcaps.net/filedata/fetch?id=3591771


                              https://www.badcaps.net/filedata/fetch?id=3591772

                              It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

                              https://www.badcaps.net/filedata/fetch?id=359177...
                              03-12-2025, 03:42 PM
                            • eryjus
                              Heathkit IO-4205 Power Supply Caps
                              by eryjus
                              Hello,

                              First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

                              I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

                              I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
                              ...
                              05-10-2023, 11:21 AM
                            • Paxman_Swede
                              Identifying caps on an old Zoom 9000
                              by Paxman_Swede
                              Hello!

                              I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

                              The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

                              I have studied the board and...
                              01-14-2025, 09:51 AM
                            • captain150
                              Help with switching power supply caps
                              by captain150
                              I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
                              I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
                              03-16-2025, 07:34 PM
                            • Loading...
                            • No more items.
                            Working...