Help Identifying SM Cap on TV Board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ndzied1
    New Member
    • Jul 2013
    • 3
    • USA

    #1

    Help Identifying SM Cap on TV Board

    This cap is on a board from a Zenith Tv. It is on the YSUS board and is labeled C49.

    Numbers on the Cap are X4647 33 25F

    http://www.flickr.com/photos/njdjr/9326217233/

    Thanks,
    Norm
  • PeteS in CA
    Badcaps Legend
    • Aug 2005
    • 3579
    • USA, Unsure of Planet

    #2
    Re: Help Identifying SM Cap on TV Board

    Probably 33uF, 25V, and probably a GP electrolytic, though I won't swear by it.

    There was a time when Zenith was just that, one of the best brands of TVs. Now Nadir might be closer to the truth. Kind of like the meaning of Acme and what its connotation became courtesy of dozens of Roadrunner (Beep! Beep!) cartoons. Back in the 80s I dealt with a magnetics and P/Ss vendor called Acme Electric. It took a while for me to get past the impulse to snicker at the name. They've been around a lot longer than I have.
    PeteS in CA

    Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
    ****************************
    To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
    ****************************

    Comment

    • ndzied1
      New Member
      • Jul 2013
      • 3
      • USA

      #3
      Re: Help Identifying SM Cap on TV Board

      Thanks, I purchased some from Newark. we'll see if they do the trick.

      Comment

      Related Topics

      Collapse

      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        11-22-2024, 01:46 PM
      • m1ch43lzm
        HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
        by m1ch43lzm
        Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
        Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
        05-12-2025, 08:37 PM
      • howardc64
        TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
        by howardc64
        All left and right refers to looking from rear of TV (or looking from front with TV upside down)
        • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
        • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
        ...
        07-24-2025, 05:17 PM
      • ugamazing
        Assistance with identifying resistor value on 820-02918 A2992 board?
        by ugamazing
        Working on a 2023 M3 A2992 unit with 820-02918 board, and it uses a new USB-C power architecture, with rectangular controllers. I do not have a perfect-matching board, so have been repairing this one the old-fashioned way (slowly).

        I managed to blow-away a single resistor that I can't find and can't determine the value of. It connects to ground, so I went ahead and stuffed it with a 100K resistor in case it's a simple pull-up. But, I'm now having issues with that side of the board, and am curious if it's possibly related to this resistor! I have no schematics and no board view, so...
        09-06-2024, 08:33 AM
      • Hakuu
        LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
        by Hakuu
        Hi There,

        This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

        After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

        More Details

        TV Model - LG OLED77G1PUA

        Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
        07-12-2023, 02:37 PM
      • Loading...
      • No more items.
      Working...