Got two ADSL modems (Motorola 2210, Netopia 2240N), fulla CapXon KF caps, both had one blown (near the DC jack on the motorola, Temporarily kludged a used G-Luxon in there so I can get online), and behind the tx from the phone line on the Netopia. Any suggestions as to what to replace these with?
-
Last edited by Hemingray; 03-16-2013, 09:53 AM. -
Re: Best replacement for CrapXon KF?
UPDATE: Ordered some Rubys from the BCN store for both modems. Only two I couldn't find were a 25uF/22V, and a 3300uF/16V (Seen plenty of 6.3v 3300s though) -
Re: Best replacement for CrapXon KF?
22uF 25V is hereOriginally posted by Hemingray View Post
https://www.badcaps.net/store/produc...roducts_id=102
What does DC voltage does the power adapter provide? If it is around 5V, you can safely use 3300uF 10V.--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
-
Re: Best replacement for CrapXon KF?
It uses 12VDC. For the 470/16 near the DC jack I ordered a 470/25 for a little more headroom.
I see that, but what goes there is a 22/35. (I got my #s mixed up it looks like, I meant 22uF/35V)Comment
-
Re: Best replacement for CrapXon KF?
If your DC adapter is outputting 12V DC, then a 22uF 25V will work fine even if the original is a 22uF 35V. Even a 22uF 16V will work fine if the 12V DC adapter is regulated. If the DC adapter is unregulated, it may run higher than 12V without a load.Originally posted by Hemingray View Post--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
Comment