Dell Tigris AIO Motherboard 70MRT Desktop Schematic
13048-1
13048-1
-
Hi everyone,
Does anyone happen to have the schematic (and if available also: the board view) for the Dell Precision 3650 Tower motherboard please?
Manufacturer: Dell
Model: Precision 3650 Tower
Motherboard markings:- IPRKL-RDT REV: A00
- D33D66
- CN-0NDYHG-PE100-1AM-05SY-A01
- P&Q 2134 CM-4 94V-0 E162264
-
Hi All, I have a 9th Gen Dell Optiplex micro PC motherboard which doesn't power on. When I connect the motherboard with power adapter, it goes into safe mode and turns off. So from info I have gathered online, it looks like there is a short circuit on the motherboard. So can you guys help me with figuring out the issue?
I am new to electronics repair, so my queries could be naive but I am ready to learn.
So I have a multimeter and a solder with me. But I can try to get a variable voltage power supply with a thermal camera as well. From what I seen online, best way is... -
Hi
I have a Dell Latitude 5350 Ultra 7 Motherboard I am trying to repair that has a blown chip.
The chip is marked as eHOLH similar to the one I have pictured.
Any ideas what it does and what the pin outs are as 3 tracks have gone and need to find out what / where they went / did etc.
Dell PN of the motherboard is 08DCGW.
Below is the area I am trying to repair:
Does anyone have a picture of this motherboard in this area they could take and upload?
Cheers... -
My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?
Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?
My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
I have tried multiple different Dell power adapters. My Dell... -
Hello Everyone and Good Day,
I've got an issue with this desktop motherboard. It does not power on, Asus Prime H310M-A R2.0. I tested 33ohms reading on 3v line on the ATX connector. It beeps on continuity mode. I tried injecting voltage from 0.9v at 1.5amps and no current being drawn. I raised the voltage to 3v @ 4amps and now I only get 22mA on current. I checked with thermal camera and there is no part heating up. I'm afraid of going further the safe voltage. What could possibly causing the line to be shorted. 5vsb has no short. I get 0.9v on positive pin of power switch. There's...