Announcement

Collapse
No announcement yet.

NVIDIA GeForce RTX 4090 (RTX4090) Schematic & Board View

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    NVIDIA GeForce RTX 4090 (RTX4090) Schematic & Board View

    NVIDIA GeForce RTX 4090 (RTX4090) Schematic & Board View

    The GeForce RTX 4090 is an enthusiast-class graphics card by NVIDIA, launched on September 20th, 2022. Built on the 5 nm process, and based on the AD102 graphics processor, in its AD102-300-A1 variant, the card supports DirectX 12 Ultimate. This ensures that all modern games will run on GeForce RTX 4090. Additionally, the DirectX 12 Ultimate capability guarantees support for hardware-raytracing, variable-rate shading and more, in upcoming video games. The AD102 graphics processor is a large chip with a die area of 609 mm² and 76,300 million transistors. Unlike the fully unlocked TITAN Ada, which uses the same GPU but has all 18432 shaders enabled, NVIDIA has disabled some shading units on the GeForce RTX 4090 to reach the product's target shader count. It features 16384 shading units, 512 texture mapping units, and 176 ROPs. Also included are 512 tensor cores which help improve the speed of machine learning applications. The card also has 128 raytracing acceleration cores. NVIDIA has paired 24 GB GDDR6X memory with the GeForce RTX 4090, which are connected using a 384-bit memory interface. The GPU is operating at a frequency of 2235 MHz, which can be boosted up to 2520 MHz, memory is running at 1313 MHz (21 Gbps effective).

    Being a triple-slot card, the NVIDIA GeForce RTX 4090 draws power from 1x 16-pin power connector, with power draw rated at 450 W maximum. Display outputs include: 1x HDMI 2.1, 3x DisplayPort 1.4a. GeForce RTX 4090 is connected to the rest of the system using a PCI-Express 4.0 x16 interface. The card's dimensions are 304 mm x 137 mm x 61 mm, and it features a triple-slot cooling solution.

    RTX4090
    Attached Files
    User submitted datasheet, schematic, boardview, service manual, firmware, bios, & software.

    #2
    Thank you!

    Comment


      #3
      Hello,
      What application can I use to open the RTX 4090 CAD files attached?
      Thank you

      Comment


        #4
        Originally posted by AndreOne View Post
        Hello,
        What application can I use to open the RTX 4090 CAD files attached?
        Thank you
        OpenBoardview, FlexBV Free , Boardviewer . https://openboardview.org/
        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment


          #5
          Thank you! :3

          Comment


            #6
            Thank you very much

            Comment


              #7
              Hey Dude, thank you for your contribution, you Rock!!!

              Comment


                #8
                thank you

                Comment


                  #9
                  hey there, do you have Zotac 4090? the board 1.8V is somehow different from other board. but I couldn't figure out how.
                  if you have Zotac 4090 boardview, I would be grateful

                  Comment


                    #10
                    Thank you so much for the 4090 strix board view!! I have a dead short on PL4 and PML2. Any direction to track down the source of the short would be helpful. I have an injector and thermal cam. The card in question is a TUF but seems to be just about the same board config as the strix.

                    Comment


                    #11
                    Originally posted by SMDFlea View Post

                    OpenBoardview, FlexBV Free , Boardviewer . https://openboardview.org/
                    thanks

                    Comment


                      #12
                      msi rtx 4090 gaming x trio
                      Attached Files

                      Comment

                      Working...
                      X