Dear Help
I have a Daewoo 17" TFT-LCD Model HL710S monitor that is dead I cheacked all the Caps with an ESR tester and they all tested OK. When I put the neg to the big cap I get voltage ot both diods on the secondary section and also on I get voltage on the secondary caps. But their is no voltage at the 5 and 12 volt output pins. What component could be the problem
Thanks, Ron
I have a Daewoo 17" TFT-LCD Model HL710S monitor that is dead I cheacked all the Caps with an ESR tester and they all tested OK. When I put the neg to the big cap I get voltage ot both diods on the secondary section and also on I get voltage on the secondary caps. But their is no voltage at the 5 and 12 volt output pins. What component could be the problem
Thanks, Ron
Comment