Magnavox 47pfl7403d/f7 plasma stuck in retail demo mode

[Paul Revere]

Does anyone know how to switch this back to consumer/home mode?

[tom66]

Re: Magnavox 47pfl7403d/f7 plasma stuck in retail demo mode

Should be an option in the first time setup menu, or if you do a factory reset.

[Paul Revere]

Re: Magnavox 47pfl7403d/f7 plasma stuck in retail demo mode

It automatically comes on in retail mode and will not accept menu commands. This is one that's been lying around the shop for some time and I have no manual Not familiar with the factory reset procedure...

[Paul Revere]

Re: Magnavox 47pfl7403d/f7 plasma stuck in retail demo mode

Just found the sticky on resets (I'm still learning what is on this site), will try that procedure..

[Paul Revere]

Re: Magnavox 47pfl7403d/f7 plasma stuck in retail demo mode

Just found the sticky on resets (I'm still learning what is on this site), will try that procedure..

That didn't work.. It won't accept any commands

[Paul Revere]

Re: Magnavox 47pfl7403d/f7 plasma stuck in retail demo mode

bump

[Moreno83]

Re: Magnavox 47pfl7403d/f7 plasma stuck in retail demo mode

Maybe via service menu?

[Shinju]

Re: Magnavox 47pfl7403d/f7 plasma stuck in retail demo mode

Do you have the original remote? Phillips/Magnavox do not like to play well with universal remotes, they have 4 color buttons on their remotes that DO NOT map to any universal remote (I have tried several high end remotes from All for One to my Harmony 520).

Some of the options need these buttons to function as you have to set commands with them. If you don't have an original remote you might want to look into getting one and see if it works with one.

[Paul Revere]

Re: Magnavox 47pfl7403d/f7 plasma stuck in retail demo mode

I figured it out. Press and hold Volume +, Channel +, then press power with the buttons on the tv set. Whew.