Re: Acoustic Solutions TV - Stuck on Standby
OK, I look at the diagram, CN117:
PIN18 12V_VCC
PIN20: DIMMIN CONTROL
PIN22: BL-ON
So you are saying they show as shorted to ground with <1 Ohm reading?
Are you sure you are not looking at the GND pins?
Also as posted in post 1 the Voltages for the 24v, 12V, etc. are low.
"I have tested PL816 for output and i got the following :
ST_BY 2.1V
+12V_1 - 3.5V
+5v STBY - ok
+3.3V STBY - ok
+24v - 16v
+12v - 4v
+33v - 15v
+3.3v - ok
+5v - 2.1V
+24V A - 16V
+30V - 16V"
OK, I look at the diagram, CN117:
PIN18 12V_VCC
PIN20: DIMMIN CONTROL
PIN22: BL-ON
So you are saying they show as shorted to ground with <1 Ohm reading?
Are you sure you are not looking at the GND pins?
Also as posted in post 1 the Voltages for the 24v, 12V, etc. are low.
"I have tested PL816 for output and i got the following :
ST_BY 2.1V
+12V_1 - 3.5V
+5v STBY - ok
+3.3V STBY - ok
+24v - 16v
+12v - 4v
+33v - 15v
+3.3v - ok
+5v - 2.1V
+24V A - 16V
+30V - 16V"
Comment