this is a cheapo chinese one.
there is no backlight. the ccfls do not turn on at all.
display is ok with the flashlight test.
voltages seem ok, 13.02V and 4.98V.
from the main board:
ADJ: 5V
EN: 0V. this is not ok, is it?
can i try to bridge a 5V in it?
there is no backlight. the ccfls do not turn on at all.
display is ok with the flashlight test.
voltages seem ok, 13.02V and 4.98V.
from the main board:
ADJ: 5V
EN: 0V. this is not ok, is it?
can i try to bridge a 5V in it?
Comment