-
Hello,
My Dyson Pure Hot+Cool, model HP00, no longer starts.
After disassembling and accessing the electronic motherboard, I found that the 16A fuse soldered to the motherboard is dead. I decided to do an electronic shunt to see the reaction, and the Dyson turns on for a few seconds and then turns off.
It is likely that a voltage control chip or a safety chip is dead, but without the electrical schematics, the repair becomes complicated…
Thank you in advance for your help.
Best regards
-
Hello guys.
Im looking for schematic and boardview to ASUS TURBO 2080TI 11GB. Is the same as EVGA board.... -
Hi there!
I have an old wine bottle cooler, it's a basic peltier cell system with a power supply built in with the controller board, with a simple display at the front door and 2 push buttons to select the desired temperatura.
Symptoms are it doesn't barely cool down, and makes a chirping noise at the board.
Both fans on each side of the peltier are (now, after much cleaning) running smooth and silent
When you turn it on, the front 7-segment display flickers for a variable time, usually like 1 minute but sometimes nothing or 3 minutes... Then turn on solid (but still some... -
Guys i need BV and schema for this card - Asus RTX3070 Turbo CG142PL...
-
Hello.
Have this Asus RTX3070 Turbo that have core stuck at 210MHz and have weird power reading in GPU-Z. I reworked power ic and core power controller but nothing changed
Owner said he dropped it
any hint?...
Working...
😀
😂
🥰
😘
🤢
😎
😞
😡
👍
👎
☕