need bios for HP ProDesk 400 G3 MT MS-7957 VER 1.0 no dump avaliable and the serail number is SGH611RDZZ

The file I sent you is showing a serial number error — it’s giving errors related to the serial number and SKU number. The display is working perfectly fine, though. Please clear this error from the file. I’ve also sent you the serial number along with it, so please check that too and fix the error for me.
HP PRODESK 400 G3 MT BUSINESS PC
SERIAL NO. MXL5510Z11
PRODUCT NO. P5U87UT...

Hello,

I have buy a second hand HP Prodesk 400 G6 mini, and the bios need an admin password.

Serial : 8CC11636P0

can anyone help me to find the password ????

Thanks for your Help....

Hi,

I have a HP Prodesk 400 G6 Mini, there is a password, could you help me remove it ?

I've dumped the bios using flashrom on a raspberry pi using the spi interface.

I've made three dumps and two are identical using diff and can be opened with UEFITool and password confirmed at the "UserCred" location.

Model : HP Prodesk 400 G6 Mini
Serial No: 8CC1241JNS
Product No: 294W6EA#ABF

Also if using a raspberry is not reliable i have a CH341A coming in a few days (and will wait for it in order to flash)
...

Hey everyone,

I'm looking for a schematic or datasheet for this mini PC. I want to see if I can add another NVMe slot, since my motherboard only has one. If anyone has it, please share. And if you have a motherboard with two NVMe slots, can you send some high-quality pics so I can figure out how to reverse-engineer it and give it a try?

Thanks a lot!

Hi;
After a black screen and fan spinning at 100% on every boot, some diagnostics lead me believe that the bios is corrupt. I'm looking for a fresh new copy of this PC
I have an HP ProDesk 400 G5 (6GE67AV)
S/N : 8CC9325F9H
SKU : 6GE67AV
Your help is really appreciated.

thanks
​...

Hello, please help with admin password
Model: Hp Prodesk 400 G6
Serial: 8CC21112QC
ProductNo: 23H33EA#ABD
32mb bios read with RT809H
RCUnlocker not help me
thanks to all...

HP ProDesk 400 G5 Base Desktop Mini PC...

Before dumping the third (last) of my three HP ProDesk 400 G6 minis, I want to clear the Intel ME firmware myself. I've seen methods like analyzing the .bin dump with ME Analyzer, then clearing it via Flash Programming Tool (FIT) and a hex editor. Other tools: Intel ME/TXE Injector, Flash Image Tool, or ME Cleaner etc. To save time experimenting, would you recommend me the best tool(s) and quick steps, please?

I know you're very active here(don't want to waste your time);
I'll learn more myself but want to avoid the wrong paths.

Thanks! Will share a new dump soon...

Hi,

as noobie to this please excuse my lack of experience.

I am trying to remove a BIOS password from this machine:
HP ProDesk 400 G6 Mini

but so far I still have no success.
I bought CH341 programmer and decided to give it a try.

The programmer came with 8 pin cables and connectors or whatever everything else is called so I had to buy a new 16 pin cable because the chip which I think is the BIOS is with 16 pins..



I connected everything and downloaded AsProgrammer and NeoProgrammer then installed drivers...

HP ProDesk 400 G6 Desktop Mini PC
Serial_8CC1270DH6
Sku_47L40EA#ABZ
Build Id_20WWQ6DT601#SABZ#DABZ
Fearture byte_3E3X476J6S6b7B7J7M7Q7T7WaBapaqaubhcAdUdpdqfAfPk8mEnV.Dh...

Remove password, please:

I hope I extracted everything correctly and the CT number is Board ID number?...

Hello need help, I am looking for the bios of the HP ProDesk 400 G6 Small Form Factor PC (6EF24AV thank you

Read https://www.badcaps.net/forum/troubl...35#post3175535

You`ll find a link to HPUnlocker in the Bios Guides sticky thread...

Hi everyone.
Could someone help me unlock the BIOS password for my HP Prodesk 400 G6 mini computer?​

​...