With this file I reflashed 2 devices.
This is step by step how I did that.
1 - Run HP BIOS Configuration Utility (BCU) - to backup original ID's.
1.1 - hpbiosconfigutility.exe /getconfig:"backup_id.txt"
1.2 - store it somewhere where you can take it when it need.
1.3 - Edit backup_id.txt, find inside string starts "Manufacturing Programming Mode" replace
1.4 - Save with replace.
2 - Desolder flash from motherboard.
3 - Put FLASH chip to programmer (in my case I used CH341A (green version))...
Leave a comment: