Andromedus_81
Senior Member
Last Activity: Today, 11:46 AM
Joined: 08-04-2023
Location: UK
-
Can you share your knowledge about which pin should be used?... -
"Is there a way to use a single master BIOS dump to unlock the Lenovo E595 Type 20NF with an AMD processor? I have around 10 units and it would simplify my work. I saw such a solution for the E495 model. Thank You for any helpLeave a comment:
-
Can someone suggest how to change the values so that the option to disable Absolute in the BIOS becomes available?...
Leave a comment:
-
Stefan Steff thank you very much.Leave a comment:
-
Can someone help with removing Absolute on this model? I'm trying to find Absolute in the hex editor but not AbtState, without success. Do I need to wipe another sector or use a different method for this model?
S/N H349G63 Dell Latitude 5310...Leave a comment:
-
It saves when I press Enter—if I reset the CMOS jumper on the motherboard with the battery disconnected, before connecting the power adapter.Leave a comment:
-
I did that, but earlier there was no confirmation that the changes were saved when I pressed Enter twice...Leave a comment:
-
One more problem with this Lenovo model: pressing Enter twice or entering a new password doesn't confirm that the password has been saved. After restarting the laptop, the password is still not removed....Leave a comment:
-
Thank you very much, volinakis and Maxpower3. I don't know, I must have had brain fog and wasn't following the Maxpower3 steps. Everything works now — thank you so muchLeave a comment:
-
Thank you volinakis, it works — I can enter the BIOS, but for some reason I can't save any changes. I get the same message every time. I'm only having this issue with this model. Is it possible that the EC is write-protected?Leave a comment:
-
Can you confirm whether pin 10 needs to be used on this model please?...Leave a comment:
-
I have a problem with this Lenovo ThinkPad T490 model, type 20N3, serial number 21R1A6. Using the EC bypass method, I can access the BIOS settings, but when I try to reset the supervisor password, it shows an error
Formset Main 1247C8E8... Failed to save storage. System. Status:Write Protected.
Legacy boot on/ Security boot OFF.
If I reset the password without saving with F10, the password comes back and I can't enter the BIOS.Leave a comment:
No activity results to display
Leave a comment: