Luis here from Viriginia, US. Owner of Your Tech Tito and been in the repair industry for 24 years. Pleasure to meet you all.
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
Hello. I'm from Lithuania, Vilnius. I am engaged in VAG car electronics repair, coding, retrofitting. In this matter, there is no way to do without a computer and other electronic devices. I found the forum when I was looking for information about unlocking the Panasonic CF bios password. removal.Comment
-
Hello, everyone. I'm from Poland. I work as an IT specialist. However, it is not only my job, but also my hobby.
My English is not very good.
I found this place while searching for information on how to remove the BIOS password on an ACER laptop. Then I needed a BIOS dump.Comment
-
Hi everyone!
I live in Japan, but I’m originally from Central Asia. I found this wonderful forum while searching for information on how to reset the BIOS password of my laptop. There’s a lot of helpful content here. I’m not a professional repair technician—fixing and reconfiguring PCs, laptops, and similar devices is just my hobby.
Nice to meet you all, and thank you!Comment
-
Hello. I'm a programmer and engineer from Ukraine. Adore hardware and make soft for it. But mostly do web right now.Comment
-
I'm requesting the BIOS and EC dump files for a Lenovo Y410P NM-A031 REV 1.0. I burned them using the LENOVO Y510P-Y410P -OK file, the 4MB file on the 25Q32FV and the 2MB file on the 26Q16DV, but it won't turn on. I understand the 4MB file is the BIOS and the 2MB file is the region code, and they need to be fused, which I don't know how to do. If that's the case, I'm missing the EC dump. Can someone please confirm?Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment