Hello alls!! I hope learn a lot from you guys
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
I’ve been immersed in the digital world long enough to remember when 56k modems were considered high speed and 8MB of RAM was something to boast about. My first machine was an olive-green 386, more “charm” than raw power, but it was enough to understand the fundamentals of tech. These days, I focus on building and optimizing network architectures that actually keep up with modern demands, while still finding time to tinker with software and hardware whenever the mood strikes.
I tend to be the behind-the-scenes architect, the one who brings servers to life and orchestrates systems that hum quietly in the background, all while everyone else assumes everything’s just “working.” And of course, I can't resist giving my old buddy a hard time for still running setups that belong more in a museum than on a modern desktop.
So if you ever want to chat about how the digital gears turn, don’t hesitate to ask—I’m always up for some nerdy talk.
Comment
-
I've been doing stereo repair for years and years just joined to help share any knowledge that might be helpful to others and to find some resources to possibly fix my macbookComment
-
halo semauanya, nama saya tamax.
senang bergabung disini.
saya harap bisa belajar banyak dari grup ini.
terima kasihComment
-
Hello! Good evening, my name is Jaqueline, Hernandez, I am 29 years old, I am From Alamo, Temapache, Veracruz, but I live in Villahermosa, Tabasco, For Work reasons, I have a degree in nursing, and I work for the private sector.
I have got two brothers, 32 and 23 years old, and a sister who is 11 years old. I haven't got any pets, but I would like to have a cat, or maybe two.
I am a tall and thin woman, with an oval Face, a medium-length nose, big dark brown eyes and short hair with a new color design, I consider that I am a respectful, hard-working, sociable, fun, polite, but a little distracted person.
In my free time I like to listen music and my favorite song is “amor de cine” of Humberto Rodriguez, watch Netflix series, my favorite is “Grey Anatomy” and read and interesting book, my favorite is ” It Ends with Us” by Hoover, Colleen, I really enjoy my time alone. My favorite meal is Italian and Asian food. I don’t practice any sport, but I like watch baseball and soccer.
That’s a little bit about me, It was a pleasure introducing myselfComment
-
Hi guys, just decided to join your lovely forums. I found this place when I was searching for capacitors for replacing the bad GSCs that are on a board that a buddy from work gave me.
Hope to have some fun here as well as learn more about computer electronics and sharpen my electronics skills.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment