Привет всем ! Я занимаюсь ремонтом ноутбуков и телевизоров , буду рад помочь !!!
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi everyone, I'm a hobbyist who enjoys working with hardware, and recently I've started repairing laptops and other PCs. I'm still a beginner when it comes to PC repairs, so l'm here to learn from all of you. Thank allComment
-
Hello,
im Lazaros 34 from Germany. I work as a IT-Systemadministrator. As a Hobby i try to repair electronic stuff. I seeking for any kind of KnowledgeComment
-
Hello everybody, I mostly fix mobile phones but also like to tinker with electronics stuff, laptop repairs, anything that has a firmware in it, I have found a lot of useful information here, cheers!Comment
-
Hi everyone,
I'm a hardware engineer with a background in high-speed PCB design, power electronics, and embedded systems. Outside of work, I spend a lot of time reverse engineering and repairing laptop motherboards—something I'm really passionate about.
I have experience with power rails, DC-DC converters, VRMs, MOSFET drivers, and general fault tracing on modern laptop boards. I'm also familiar with boardviews, schematics, and oscilloscope/multimeter diagnostics.
I joined this forum to both learn from experienced members and contribute where I can. I really appreciate the depth of technical discussion here, and I'm happy to be part of the community.
Looking forward to sharing and learning together!
Best regards,
Comment
-
been in the business for a while, have always been into computers and networking back in the days of dial up was teaching the teachers how to use the internet in the mid 90's as a high school student got into hardware repair in around 2003 with the Xbox 360 it's BGA problems. got into bios programming after windows 10 started killing the bios code. now it's on to learning ps5's. the worse parts of electronics today is it's all through away design.Comment
-
Merhaba, ben bir bilgisayar teknisyeniyim. Bu forumu sağladığı için Badcaps'e teşekkür etmek istiyorum. Yıllar boyunca burada gizlenerek saatler geçirdim. Sektörü etkileyen hatalı kapasitör sorunlarıyla ilgili eğitimlerimin çoğunu burada edindim. Teşekkür ederim!Comment
-
hi everyone, found the forum through total frustration finding a solution to bypass Bios admin pass on a optiplex micro 7010.
hoping I find something
Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment