Hello, iam dsk i like your content and thank you for share your knowledge
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
SALUDOS A TODOS, MI NOMBRE ES CRISTOPHER ACTUALMENTE ESTOY APRENDIENDO ELECTRONICA DESDE 0, PARA CONTINUAR CON MI EMPRENDIMIENTO.
ESTOY MUY CONTENTO DE PERTENECER A LA COMUNIDAD. SOY DE ECUADORComment
-
Hello. I'm a graduate student with a strong interest in mini PC and circuit board repairs. Nice to meet you.
While searching for the schematic of my RX6800XT Phantom Gaming, I came across this site. After browsing for a few days, I found it interesting and decided to join. Thank you.​Comment
-
-
-
-
Hello, Been into tech since my first 8bit home computer (jesus I'm old!) Found this site to have useful data, so I want to participate!
Thanks,
McubedComment
-
-
What a great find this website it. Thank you to all who keep it going. I am going to try my hand at updating a locked BIOS tomorrow and I'm sure ill need your help.
I have many years of IT under my belt, but I am now retired and like to tinker. I am hoping the people here can help me out. Please be patient with me. I'll try to avoid asking already answer questions and plan to use the search function. But I think I'll still need some help. So thank you in advance.
i am looking forward to learning something new.Comment
-
Good evening. I'm Troy, from Ohio. Playing with dated equipment trying to relive my childhood. Lol. No, hut seriously.
I'm terrible with any sort of introduction. Thanks for having me.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment