işimizi severek ve kaliteli yapmak için çalışıyoruz
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
buen dia estoy en este sitio para ver si puedo conseguir el esquematico de evga 1070 ti si de casualidad alguien lo tiene graciasComment
-
-
Hello everyone))
I am a raccoon, an engineer for repairing laptops, PCs, TVs and any other electronic equipment.
I have been interested in repairing and designing electronics since early childhood, and have been doing this for over 20 years.
I recently started studying programming in order to develop modern devices that would be adapted to my tasks and the tasks of other similar repair engineers.
Because we are always limited only by the equipment that third-party developers offer us, who do not know the needs of repair engineers.
I came to you to present my development of the best and most convenient programmer in the world for flashing and editing BIOS of laptops and consoles.
It is equally good for both beginners and professionals, and allows you to gain a completely new experience and significantly speed up some tasks due to its capabilities.
I created a topic about this, all the details are there
Comment
-
Hello, I'm just a DIY kinda guy who enjoys tinkering with all sorts of different things. Mainly classic cars and trucks but I also like to tinker with old appliances and new alike if there is a problem and could possibly save the patient lol.
some times it dosent always go that way and said patient dosent make it but i feel i at least get an a for effort haha.
I'm trying to be more electrical savvy as that isnt one of my strong suits. Lucky i have a neighbor who seems pretty handy in the electrical dept so i usually team up with him to help figure stuff out.
I look forward to any help and knowledge i may get here.Comment
-
Hobbiest interested in dumping and modifying laptop bios for various projects. I'm looking for an information resource for my Dell 7430. How do I dump the bios? Are there multiple bios i need to dump? Do I have to mod the chip to dump? Do I cut the vcc? Do I dump with the pc powered on? Do I have to remove all power? How do I know which winbond chips are the right. To dump?
Comment
-
Bueno me presento, soy un electrónico y autodidacta desde los años 86 que me gustó la informática,que nos enseñaron a realizar programación en basic en una Commodore y un Tv , (Nuestra primer computadora)
Esto ha avanzado bien rápido y todo sea miniaturizado pero los principios de la electrónica se mantienen🧰🔬📡🛰️
Empecé en electrónica realizando reparaciones de equipos con tecnología de bulbos hoy con microprocesadores y tecnología SMD.
Me gusta analizar cualquier cosa electrónica.
Comment
-
Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment