Hello, I am 22 years old, I have been assembling computers, I have been doing repairs for 12 years, and I am always present. I am happy to join you
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
Hi folks,
I've learned electronics at professionnal school in the late 90's, became showbusiness electrics and now returning trying to fix some suff of mine realising that a lot have changed in some was but some other didn't so I hope to find here some help to fill the voids to allow me to get back in.
Thank youComment
-
-
-
Hi,
my name is Markus, 38 years old, licensed to solder.
My dad taught me how to solder as a child, but then I lost interest in electronics except building PCs. Then, in 2006 I started training as a technician in first level support. After that and with a bit of luck, I landed a job as a field service technician. Our company focuses on doing safety checks on medical devices. Since that mostly involves routine work, my interest in electronics was rekindled. These days, I do repairs for friends and family, micro-soldering, and DIY projects as a hobby.Comment
-
Bonjour, Je suis content d'avoir trouvé votre site car j'ai un problème de démarrage avec un téléviseur Blaupunkt 32" depuis plusieurs années et il est dit que le problème vit d'un firmware. J'ai trouve un firmware qui semble correspondre sur votre site et je vous en remercie, je dois reprogrammer la 25Q32Comment
-
Salut , J'ai 54 ans ,je vis dans le sud ouest de la Fance ,et je cherche à me former au diagnostique de pannes et la micro soudure afin de me recycler professionellement à la réparation d'objets électroniques.
Menuisier de formation ,je pars de loin , mais je suis curieux , donc j'espere trouver les réponses à mes interrogations ici.
soyez indulgents avec moi , je débute .
Merci a vousComment
-
Hello,
I have a broken motherboard and found some usefull information here to fix it. I also need some additional support, so thats why I joined.
Thanks
RomanComment
-
Hey,
New to repair, I'm looking to learn from all of you and maybe be able to throw less stuff away than I already have, I've had bent pins of CPU and was lucky enough to save the CPU despite having one pin fall (probably a ground one).
I've been following Louis Rossmann and lately I've been running into more and more hardware issues so I would like to get better at soldering and electronic repairs.Comment
-
-
> Hey everyone,
>here’s my story. Call me Kilo, I’m 36, born and raised in >Germany. I’ve been messing around with computers, >laptops, and phones my whole life. I do a lot of >experimenting with Linux, messing with root privileges >and security holes. Lately, I’ve been trying to fix devices >and ran into some issues with UEFI/BIOS chips. Now I’m >trying to wrap my head around them and fix the >problems. > See ya,
> Kilo
Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment